Flow Sensor Ifm SU6631


IFM CATEGORIES

Flow Sensor Ifm su6631

Flow Sensor SU6631

Brand: Ifm
Product Code: SUN12XFBFRKG/US

  • Precise flow measurement for ultrapure water, water, oils, and glycol solutions
  • A durable, component-free measurement tube constructed from stainless steel provides excellent media resistance and long-lasting ingress protection
  • The extremely precise inline measurement method eradicates any impact from differing wall thicknesses and pipe materials
  • Operating status LED indicates the sensor's condition and provides insights into process quality

Share on:

Product characteristics

Measuring span
0.5...65 l/min0.03...3.9 m³/h8...1030 gph0.13...17.17 gpm
Connection for process screw connection 1/2" NPT with outdoor threading DN15
System gold-plated terminals
Media ultra-pure water; H2O; water-soluble substances; glycol mixtures; oils; coolants
Comment on medium
water-based fluids: for mediums with >10% additives, the repeatability is the sole available parameter
lightweight oils with viscosity: 7...40 mm²/s (40 °C)
high-viscosity oils with viscosity: 30…68 mm²/s (40 °C)
Intermediate temperature value
-20...100 °C-4...212 °F
Minimum force per unit area before bursting
150 bar15 MPa
Pressure classification
100 bar10 MPa
Vacuum tolerance[mbar] -1000
Response duration[s] < 0.25; (dAP = 0, T09)
Damping process parameter dAP[s] 0...5

Software / programming

diagnostic functions flow detection direction; signal integrity
communication interface IO-Link
Mode of transmission COM2 (38,4 kBaud)
IO-Link version 1.1.3
SDCI specification IEC 61131-9: 2013-07
Configurations
Operation classOverview
0x4000Identification and Fault Detection
Necessary master port category A
Analog data process 3
Data binary process 2
Minimum process cycle duration[ms] 9.6
IO-Link cyclic process data
Operationbit length
cumulative counter32
Flow supervision32
Temperature surveillance32
status4
Output 11
Output 21
Supported DeviceIDs>
Mode of operationDeviceID
default1755
Measuring span
0.5...65 l/min0.03...3.9 m³/h8...1030 gph0.13...17.17 gpm
Show range
-78...78 l/min-4.68...4.68 m³/h-1236...1236 gph-20.61...20.61 gpm
Definition of detail level
0.1 l/min0.002 m³/h1 gph0.01 gpm
Setpoint SP
0.9...65 l/min0.052...3.9 m³/h14...1030 gph0.23...17.17 gpm
Reset threshold rP
0.5...64.7 l/min0.032...3.88 m³/h8...1025 gph0.14...17.08 gpm
Analog initiation point ASP
-65...52 l/min-3.9...3.12 m³/h-1030...824 gph-17.17...13.74 gpm
Analog endpoint AEP
-52...65 l/min-3.12...3.9 m³/h-824...1030 gph-13.74...17.17 gpm
Minimal flow termination LFC
0.5...3.2 l/min0.03...0.195 m³/h8...52 gph0.13...0.86 gpm
Frequency termination point, FEP
13...65 l/min0.782...3.9 m³/h207...1030 gph3.44...17.17 gpm
Frequency at termination point FRP[Hz] 1...10000

Inputs

Inputs reset function
Voltage for operation[V] 18...32 DC; (to SELV/PELV)
Current draw[mA] < 75
Safety feature rating III
Reverse polarity safeguard yes
Activation delay time[s] 5
Measuring method ultrasonics
Overall count of outputs 2
Output response output signal; pulse output; analog output; IO-Link; frequency output; diagnostic output; cumulative counter output signal
Electrical engineering design PNP/NPN
Output feature typically open / closed; (customizable)
Max. voltage drop at switching output DC[V] 2
Continuous current rating of the switching output DC[mA] 100
DC switching frequency[Hz] 0...10000
Analog current output[mA] 4...20
Max. capacity[O] 500
Pulse output signal flow measurement device
Overcurrent protection yes
Method of overcurrent protection yes (momentary)
Overcurrent protection yes
Precision (within the measurement range)
glycol mixtures (35%)±(5,0 % MW + 0,5 % MEW)
high-viscosity oils with viscosity 46 mm²/s (40 °C)±(5,0 % MW + 1,0 % MEW)
thin oils with viscosity 10mm²/s (40°C)±(5,0 % MW + 1,0 % MEW)
water± (2,0 % MW + 0,5 % MEW)
Reproducibility ± 0,2 % MEW
Surrounding temperature value[°C] -20...60
Temperature for storage[°C] -25...80
Safety feature IP 67

Download Specification for SU6631

Download PDF

RELATED PRODUCTS