Level Sensor Ifm LR8300
IFM CATEGORIES
Level Sensor LR8300
Brand: Ifm
Product Code: LR0000B-BN34ASPKG/US
- For dependable level management in tanks and containers
- Compatible with water and water-based fluids
- Easily readable numerical display
- Modular configuration comprising an evaluation unit and a probe
- Probes can be trimmed to length for enhanced application versatility
Contact via Zalo
Phone call
Product characteristics
| Total count of inputs and outputs | Count of digital outputs: 4 | ||||||||
| Length L of probe[mm] | 100...1600 | ||||||||
| Connection for process | screw connection 3/4" NPT with outdoor thread | ||||||||
| System | gold-plated terminals | ||||||||
| Application | for commercial applications | ||||||||
| Media | Liquids | ||||||||
| Dielectric permittivity of the medium | = 5 | ||||||||
| Suggested media | water; aqueous media | ||||||||
| Not suitable for | Refer to the operating manual, section "Operation and features" | ||||||||
| Operating temperature value[°C] | -25...80; (90 < 1 h ; see note under remarks) | ||||||||
| Pressure classification |
| ||||||||
| Vacuum strength |
| ||||||||
| MAWP (for uses in compliance with CRN)[bar] | 16 | ||||||||
| communication interface | IO-Link | ||||||||
| Mode of transmission | COM2 (38,4 kBaud) | ||||||||
| IO-Link version | 1.1 | ||||||||
| SDCI specification | IEC 61131-9 CDV | ||||||||
| Configurations | without profile | ||||||||
| SIO mode | yes | ||||||||
| Necessary master port category | A | ||||||||
| Analog data process | 1 | ||||||||
| Data binary process | 4 | ||||||||
| Minimum process cycle duration[ms] | 2.3 | ||||||||
| Supported DeviceIDs |
| ||||||||
| Display |
|
Operating conditions
| Surrounding temperature value[°C] | -25...60 |
| Temperature for storage[°C] | -40...85 |
| Safety feature | IP 67 |
| Length L of probe[mm] | 100...1600 |
| Operating range A[mm] | L-40 |
| Non-active range I1 / I2[mm] | 30 / 10 |
| data acquisition frequency[Hz] | 4 |
Inputs / outputs
| Total count of inputs and outputs | Count of digital outputs: 4 |
| Voltage for operation[V] | 18...30 DC |
| Current draw[mA] | < 30 |
| Safety feature rating | III |
| Reverse polarity safeguard | yes |
| Activation delay time[s] | < 3 |
| Measuring method | guided wave radar |
| Overall count of outputs | 4 |
| Output response | output signal; IO-Link |
| Electrical engineering design | PNP |
| Count of digital outputs | 4 |
| Output feature | typically open / closed; (customizable) |
| Max. voltage drop at switching output DC[V] | 2.5 |
| Continuous current rating of the switching output DC[mA] | 200 |
| Overcurrent protection | yes |
| Method of overcurrent protection | thermal, pulsed mode |
| Overcurrent protection | yes |
| Reproducibility[mm] | ± 5 |
| Measurement error[mm] | ± 7 |
| Offset deviation[mm] | 5 |
| Definition of detail level[mm] | 1 |
| Temperature shift per 10 K | ± 0.2 % |
| Weight[g] | 351.5 |
| Substance | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); fluorocarbon elastomer (FKM); polybutylene terephthalate (PBT); polycarbonate (PC); polyetherimide (PEI); thermoplastic elastomer (TPE-V) |
| Substances (contacted components) | stainless steel (1.4305 / 303); probe interface: stainless steel (1.4435 / 316L); PTFE; FKM |
| Connection for process | screw connection 3/4" NPT with outdoor thread |
Download Specification for LR8300
Download PDFRELATED PRODUCTS
Level Sensor LI2133
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
LI0481--K-00KQPKG/US/WHG
Level Sensor LI2131
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
LI0132--K-00KQPKG/US/WHG
Level Sensor KI5300
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
KI-3250NANKG/SL/1P/IO
Level Sensor LMT01A
- Brand: IFM
-
Category Ifm Products:
Level Sensor -
Product Code:
LMACE-A12E-QSKG-1/US/3D/3G
