Ultrasonic Sensor Ifm UGT213

IFM CATEGORIES

Ultrasonic Sensor UGT213

Brand: Ifm
Product Code: UGC00800EOKG/IO-Link/US

Especially compact design for applications in environments with limited space
Programmable output function typically open / default closed
Non-contact sensing unaffected by the object's color, transparency, or surface properties
Easily visible LED for displaying switching status and echo

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Electrical engineering design	PNP
Output feature	typically open / closed; (customizable)
Detection range[mm]	60...800; (Target: 200 x 200 mm)
communication interface	IO-Link
Housing	Screw-type
measurements[mm]	M18 x 1 / L = 60.5
Voltage for operation[V]	10...30 DC; (cULus - Class 2 source required)
Current draw[mA]	< 35
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	< 0.3
Frequency converter[kHz]	230
Configuration options	hysteresis / bandwidth; secondary switching point; activation and deactivation delay; switch-on cycles; teach mode; light-on/dark-on configuration
Weight[g]	56
Housing	Screw-type
measurements[mm]	M18 x 1 / L = 60.5
Thread specification	M18 x 1
Substance	PBT; PA; epoxy glass-ceramics
Fastening torque[Nm]	1

Interfaces

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor: Device Identification; Multi-channel, two setpoint switching sensor, type 0 Generic Profiled Sensor; Data Process Variable; Device Diagnosis; Learning Channel

SIO mode

yes

Necessary master port category

Minimum process cycle duration[ms]

IO-Link cyclic process data

Operation	bit length
measured value	16
device status	4
two-state switching data	2

IO-Link acyclical functions

application-specific label; runtime meter

Supported DeviceIDs

Mode of operation	DeviceID
default	890

Note

For additional details, please refer to the IODD PDF document in the "Downloads" section

Surrounding temperature value[°C]

-20...70

Temperature for storage[°C]

-30...80

Safety feature

IP 67

Detection range[mm]

60...800; (Target: 200 x 200 mm)

shadow area[mm]

Cylindrical aperture angle[°]

15; (±2)

Max. allowable angle deviation from 90° for sensor/object[°]

± 4

Inputs

Synchronization signal input	no
Multiplexed input	no
Total count of inputs and outputs	Count of digital outputs: 1
Overall count of outputs	1
Electrical engineering design	PNP
Count of digital outputs	1
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2.2
Continuous current rating of the switching output DC[mA]	100
DC switching frequency[Hz]	5
Overcurrent protection	yes
Overcurrent protection	yes
Temperature adjustment	yes
Hysteresis[%]	< 1
Setting-point drift[%]	-2...2
Reproducibility	<0,7 %
Definition of detail level[mm]	1
Comments on the precision / variation	The specified values are achieved following a warm-up period of at least 20 minutes