Inductive Sensor Pepperl+Fuchs NBB10-30GM30-E0-T-V1-Y263235
Pepperl+Fuchs Categories
Inductive Sensor NBB10-30GM30-E0-T-V1-Y263235
Brand: Pepperl+Fuchs
Product Code:
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NBB10-30GM30-E0-T-V1-Y263235
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | NPN | |
| Specified functioning distance | 10 mm | |
| mounting | flush | |
| Output configuration | DC | |
| Guaranteed functioning distance | 0 ... 8.1 mm | |
| Actuating component | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 30 mm x 30 mm x 1 mm |
|
| diminution factor rAl | 0.4 | |
| diminution factor rCu | 0.3 | |
| diminution factor r304 | 0.7 | |
| diminution factor rBrass | 0.4 | |
| Output configuration | 3-wire | |
| Rated specifications | ||
| mounting requirements | ||
| B | 25 mm | |
| C | 16 mm | |
| F | 37 mm | |
| Operational voltage | 10 ... 30 V | |
| commutation frequency | 0 ... 300 Hz | |
| Deadband | 0.05 ... 2.2 mm | |
| Polarity reversal protection | yes | |
| Overcurrent protection | yes | |
| Overload capacity | yes | |
| Cable breakage protection | yes | |
| Inductive surge protection | yes | |
| Overvoltage protection | yes | |
| Ripple | 10 % | |
| voltage loss | = 2.5 V | |
| Repeatability accuracy | 0.3 mm | |
| Operational current | 0 ... 200 mA up to 85 °C; above this temperature, a maximum of 150 mA | |
| Non-conducting current | = 0.01 mA | |
| No-load input current | = 7 mA | |
| Delay time prior to availability | = 40 ms | |
| State indication for switching | Yellow multihole LED | |
| Parameters related to functional safety | ||
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Ambient storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical characteristics | ||
| Linkage method | plug connector M12 x 1, 3-contact | |
| Housing material | brass with a nickel coating | |
| detection surface | PBT | |
| Protection等级 | IP67 | |
| Mass | 80 g | |
| Measurements | ||
| Length | 45 mm | |
| Diameter | 30 mm | |
| Overview information | ||
| Note | The sensor is capable of functioning at ambient temperatures reaching up to 120 °C for limited durations (<30 minutes). Under these conditions, the output load capability decreases to 100 mA | |
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NBB10-30GM30-E0-T-V1-Y263235
Download PDFRELATED PRODUCTS
Inductive Sensor NJ2-D-US-2.062-V93-Y909173
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
Inductive Sensor NMB6-F104M-E2-C-NFE-200MM-V1
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
Inductive Sensor NBB1,5-F79-E2-Y70134093
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code: