Inductive Sensor Pepperl+Fuchs NBB2-F1-US

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Overall specifications
transition function		normally open (NO)
Output configuration		Two-wire
Specified functioning distance		2 mm
mounting		flush
Output configuration		AC/DC
Guaranteed functioning distance		0 ... 1.62 mm
diminution factor r_Al		0.3
diminution factor r_Cu		0.2
diminution factor r₃₀₄		0.7
Output configuration		2-wire
Rated specifications
commutation frequency		0 ... 25 Hz
Deadband		typ. 5%
Polarity reversal protection		reverse polarity safeguarded
Overcurrent protection		pulsing
voltage loss		= 7 V
Transient current (20 ms, 0.1 Hz)		0 ... 2100 mA
Nominal functioning current		4 ... 250 mA AC 4 ... 100 mA DC
Non-conducting current		= 1.7 mA
No-load input current		= 4 mA
Voltage functioning indicator		LED, green
State indication for switching		LED, yellow
Electrical parameters
Nominal functioning voltage		20 ... 250 V AC/DC
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Standard Use
CSA certification		cCSAus Listed, Intended for General Use
CCC certification		Approved by China Compulsory Certification (CCC)
Environmental conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical characteristics
Linkage method		cable PVC , 2 m
cross section of the core		0.5 mm²
Housing material		PA
detection surface		PA
Protection等级		IP67
Fastening torque for securing screws		Threading process M3 maximum: 1.1 Nm
Measurements
	Height	40 mm
	Width	12 mm
	Length	26 mm