Inductive Sensor Pepperl+Fuchs NBB2-F41-E2-V3

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Overall specifications
transition function		normally open (NO)
Output configuration		PNP
Specified functioning distance		2 mm
mounting		flush
Output configuration		DC
Guaranteed functioning distance		0 ... 1.62 mm
diminution factor r_Al		0.45
diminution factor r_Cu		0.4
diminution factor r₃₀₄		0.75
Output configuration		3-wire
Rated specifications
Operational voltage		10 ... 30 V DC
commutation frequency		0 ... 3000 Hz
Deadband		typ. 3 %
Polarity reversal protection		reverse polarity safeguarded
Overcurrent protection		pulsing
voltage loss		= 3 V
Operational current		0 ... 100 mA
Non-conducting current		0 ... 0.5 mA typ.
	Non-conducting current I_U =40 °C, deactivating the switching element	=
No-load input current		= 15 mA
Delay time prior to availability		= 20 ms
State indication for switching		LED, yellow
Parameters related to functional safety
MTTF_d		1528 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Standard Use
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical characteristics
Linkage method		Connector device jack M8 x 1, 3-contact
Housing material		brass with a nickel coating
detection surface		PBT
Protection等级		IP67
Mass		13.5 g
Measurements
	Height	8 mm
	Width	8 mm
	Length	46 mm