Inductive Sensor Pepperl+Fuchs NBB20-U4-US-V93P
Pepperl+Fuchs Categories
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NBB20-U4-US-V93P
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | Two-wire | |
| Specified functioning distance | 20 mm | |
| mounting | flush | |
| Output configuration | AC/DC | |
| Guaranteed functioning distance | 0 ... 16.2 mm | |
| Actual sensing distance | 18 ... 22 mm | |
| diminution factor rAl | 0.4 | |
| diminution factor rCu | 0.3 | |
| diminution factor r304 | 0.77 | |
| diminution factor rFe | 1 | |
| diminution factor rBrass | 0.43 | |
| Output configuration | 2-wire | |
| Rated specifications | ||
| commutation frequency | AC, 0 ... 30 Hz DC, 0 ... 100 Hz |
|
| Deadband | 1 ... 10 % typ. 5 % | |
| Polarity reversal protection | reverse polarity resistant | |
| Overcurrent protection | pulsing | |
| voltage loss | = 5 V (typ. 2V) DC operation = 8 V (typ. 2V) AC operation |
|
| Transient current (20 ms, 0.1 Hz) | 0 ... 3000 mA | |
| Operational current | 5 ... 500 mA | |
| Non-conducting current | = 1.5 mA | |
| Delay time prior to availability | = 300 ms | |
| Voltage functioning indicator | LED, green | |
| State indication for switching | LED, yellow | |
| Fault indicator | flashes during overcurrent condition | |
| Parameters related to functional safety | ||
| MTTFd | 540 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Electrical parameters | ||
| Nominal functioning voltage | 24 ... 250 V DC / 24 ... 230 V AC | |
| Operational voltage | 20 ... 300 V DC / 20 ... 253 V AC | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Certifications and approvals | ||
| Ingress protection rating | I | |
| Nominal insulation voltage | 230 V | |
| Rated surge voltage withstand capability | 2.5 kV | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Ambient storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical characteristics | ||
| Linkage method | plug connector | |
| Cable entry point | ||
| Note | terminal chamber - filled with resin | |
| Housing material | PA 6.6 / metal | |
| detection surface | PA 6.6 | |
| enclosure base | metal / Class I apparatus with grounding connection | |
| Protection等级 | IP67 | |
| Connector device | ||
| Threading process | 7/8 inch-16 UN | |
| Pin count | 3 | |
| Mass | 298 g | |
| Measurements | ||
| Height | 40 mm | |
| Width | 40 mm | |
| Length | 118 mm | |
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NBB20-U4-US-V93P
Download PDF
RELATED PRODUCTS
Inductive Sensor NBN2,5-8GM35-E1L-0,5M-Y
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
Inductive Sensor NMB1,5-8GM35-E2-C-FE-150MM-V3
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
