Inductive Sensor Pepperl+Fuchs NBN4-12GM40-E2-T-V1
Pepperl+Fuchs Categories
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NBN4-12GM40-E2-T-V1
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | PNP | |
| Specified functioning distance | 4 mm | |
| mounting | non-flush | |
| Output configuration | DC | |
| Guaranteed functioning distance | 0 ... 3.24 mm | |
| Actuating component | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 12 mm x 12 mm x 1 mm |
|
| diminution factor rAl | 0.5 | |
| diminution factor rCu | 0.4 | |
| diminution factor r304 | 0.8 | |
| diminution factor rBrass | 0.5 | |
| Output configuration | 3-wire | |
| Rated specifications | ||
| mounting requirements | ||
| A | 8 mm | |
| B | 9 mm | |
| C | 8 mm | |
| F | 27 mm | |
| Operational voltage | 10 ... 30 V | |
| commutation frequency | 0 ... 800 Hz | |
| Deadband | 0.03 ... 0.88 mm | |
| Polarity reversal protection | yes | |
| Overcurrent protection | yes | |
| Overload capacity | yes | |
| Cable breakage protection | yes | |
| Inductive surge protection | yes | |
| Overvoltage protection | yes | |
| Ripple | 10 % | |
| voltage loss | = 2.5 V | |
| Repeatability accuracy | 0.2 mm | |
| Operational current | 0 ... 200 mA | |
| Non-conducting current | = 0.01 mA | |
| No-load input current | = 7 mA | |
| Delay time prior to availability | = 40 ms | |
| State indication for switching | omnidirectional LED, yellow | |
| Parameters related to functional safety | ||
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Certifications and approvals | ||
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) | |
| Ambient storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical characteristics | ||
| Linkage method | 4-pin, M12 x 1 connector | |
| Housing material | brass with a nickel coating | |
| detection surface | PBT | |
| Protection等级 | IP67 | |
| Mass | 12 g | |
| Measurements | ||
| Length | 37 mm | |
| Diameter | 12 mm | |
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NBN4-12GM40-E2-T-V1
Download PDFRELATED PRODUCTS
