Inductive Sensor Pepperl+Fuchs NBxx-F58A1x3-E8-V1

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Item Specification
Amplifier module

Overall specifications
transition function		2 x normally open (NO)
Output configuration		PNP
Output configuration		DC
Output configuration		4-wire
Rated specifications
Operational voltage		10 ... 30 V
commutation frequency		0 ... 1500 Hz
Polarity reversal protection		reverse polarity safeguarded
Overcurrent protection		pulsing
voltage loss		= 3 V
Nominal insulation voltage		60 V
Operational current		0 ... 100 mA
Non-conducting current		0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load input current		= 16 mA
Uniform magnetic field		300 mT
Oscillating magnetic field		300 mT
Signal rejection		yes
Voltage functioning indicator		LED green
State indication for switching		Transition state "closed" = LED indicator red (S2) Transition state "open" = yellow LED (S1)
Parameters related to functional safety
MTTF_d		950 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Standard Use
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Ambient storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Contamination level		2
Mechanical characteristics
Linkage method		plug connector M12 x 1, 4-contact
Housing material		PA66
Protection等级		IP65
Mass		35 g
Measurements
	Height	18.5 mm
	Width	18 mm
	Length	47 mm
Note		only for use with satellite unit NBN2-F58xx... family