Inductive Sensor Pepperl+Fuchs NJ60-FP-E2-P2-V1

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Overall specifications
transition function		normally open (NO)
Output configuration		PNP
Specified functioning distance		60 mm
mounting		non-flush
Output configuration		DC
Guaranteed functioning distance		0 ... 48.6 mm
diminution factor r_Al		0.4
diminution factor r_Cu		0.3
diminution factor r₃₀₄		0.85
Output configuration		3-wire
Calibration support		LED, green/red
Rated specifications
Operational voltage		10 ... 30 V
commutation frequency		8 Hz
Deadband		typ. 3 %
Polarity reversal protection		reverse polarity safeguarded
Overcurrent protection		pulsing
voltage loss		= 3 V
Operational current		0 ... 200 mA
No-load input current		= 20 mA
Delay time prior to availability		= 20 ms
Voltage functioning indicator		LED, green
State indication for switching		LED, yellow
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Standard Use
CSA certification		cCSAus Listed, Intended for General Use
Environmental conditions
Ambient temperature		0 ... 60 °C (32 ... 140 °F)
Mechanical characteristics
Linkage method		plug connector
Housing material		POM
detection surface		POM
Protection等级		IP65
Connector device
	Threading process	M12 x 1
	Pin count	4
Measurements
	Height	40 mm
	Width	80 mm
	Length	80 mm