Inductive Sensor Pepperl+Fuchs NMB10-18GH50-E2
Pepperl+Fuchs Categories
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NMB10-18GH50-E2
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | PNP | |
| Specified functioning distance | 10 mm | |
| mounting | recessed in mild steel | |
| Output configuration | DC | |
| Guaranteed functioning distance | 0 ... 8.1 mm | |
| diminution factor rAl | 0.4 | |
| diminution factor rCu | 0.25 | |
| diminution factor r304 | 0.5 (0.9 of material thickness 2 mm) | |
| diminution factor rSt37 | 1 | |
| Output configuration | 3-wire | |
| Rated specifications | ||
| mounting requirements | ||
| A | 0 mm | |
| B | 16 mm | |
| C | 30 mm | |
| F | 60 mm | |
| Operational voltage | 10 ... 30 V | |
| commutation frequency | 0 ... 300 Hz | |
| Deadband | 3 ... 15 typ. 5 % | |
| Polarity reversal protection | yes | |
| Overcurrent protection | yes | |
| voltage loss | = 2 V | |
| Operational current | 0 ... 200 mA | |
| Non-conducting current | = 0.1 mA | |
| No-load input current | = 10 mA | |
| Delay time prior to availability | = 40 ms | |
| State indication for switching | LED, yellow | |
| Boundary data | ||
| Static functioning pressure | 60 bar (870.2 psi) max. | |
| Parameters related to functional safety | ||
| MTTFd | 655 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Certifications and approvals | ||
| UL certification | cULus Certified, Standard Use | |
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical characteristics | ||
| Linkage method | cable TPE-S , 2 m 3 x 0.34 mm2 | |
| Housing material | Stainless steel 1.4435 / AISI 316L | |
| detection surface | Stainless steel 1.4435 / AISI 316L | |
| Protection等级 | IP68 / IP69K | |
| Mass | 112 g | |
| Measurements | ||
| Length | 70 mm | |
| Diameter | 18 mm | |
| Overview information | ||
| Assembly measurements | x: 18 mm y: = 4 mm |
|
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NMB10-18GH50-E2
Download PDFRELATED PRODUCTS
Inductive Sensor NJ1,5-8GM40-E2-0,14M-V1
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
