Inductive Sensor Pepperl+Fuchs NMB10-18GM55-Z4-C4-300MM-V1
Pepperl+Fuchs Categories
Inductive Sensor NMB10-18GM55-Z4-C4-300MM-V1
Brand: Pepperl+Fuchs
Product Code:
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NMB10-18GM55-Z4-C4-300MM-V1
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | Two-wire | |
| Specified functioning distance | 10 mm | |
| mounting | flush | |
| Output configuration | DC | |
| Guaranteed functioning distance | 0 ... 8.1 mm | |
| Actuating component | Ferrous and non-ferrous targets | |
| diminution factor rAl | 0 | |
| diminution factor rCu | 0 | |
| diminution factor r304 | 0.8 | |
| diminution factor rSt37 | 1 | |
| diminution factor rBrass | 0 | |
| Output configuration | 2-wire | |
| Rated specifications | ||
| Operational voltage | 6 ... 30 V DC | |
| commutation frequency | 1 Hz | |
| Deadband | 3 ... 15 typ. 5 % | |
| Polarity reversal protection | reversed polarity conductive | |
| Overcurrent protection | yes | |
| voltage loss | < 3 V DC | |
| Operational current | 2 ... 100 mA | |
| Non-conducting current | < 400 µA | |
| State indication for switching | LED, red | |
| Magnetic field intensity, alternating current fields | 250 mT | |
| Magnetic field strength, direct current fields | 250 mT | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Certifications and approvals | ||
| UL certification | cULus Certified, Standard Use | |
| CSA certification | cCSAus Listed, Intended for General Use | |
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical characteristics | ||
| Linkage method | permanent cable with plug | |
| Housing material | Xylan coated - Stainless steel 1.4305 / AISI 303 | |
| detection surface | Xylan coated - Stainless steel 1.4305 / AISI 303 | |
| Protection等级 | IP67 | |
| Connector device | ||
| Threading process | M12 x 1 | |
| Fastening torque | 0.6 Nm | |
| Pin count | 3 | |
| Cable | ||
| Cable thickness | 4.8 mm ± 0.2 mm | |
| Material | POC | |
| Color | orange | |
| Core count | 4 | |
| cross section of the core | 0.34 mm2 | |
| Length | 300 mm | |
| Mass | 76 g | |
| Measurements | ||
| Length | 55 mm | |
| Diameter | 18 mm | |
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NMB10-18GM55-Z4-C4-300MM-V1
Download PDF
RELATED PRODUCTS
Inductive Sensor NBN8-12GM50-E2-0,2M-V3
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
Inductive Sensor NSB10-30GM50-2E2-M1-S2D2
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
