Inductive Sensor Pepperl+Fuchs NRB20-L3-E2-IO-C-V1

Pepperl+Fuchs Categories

Inductive Sensor NRB20-L3-E2-IO-C-V1

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of NRB20-L3-E2-IO-C-V1

Overall specifications
transition function		Programmable normally open/closed (NO/NC)
Output configuration		PNP
Specified functioning distance		20 mm (factory default)
Proximity functioning range		15 mm (activation possible through software)
mounting		flush
Output configuration		DC
Guaranteed functioning distance		0 ... 16.2 mm
diminution factor r_Al		1
diminution factor r_Cu		1
diminution factor r₃₀₄		1
diminution factor r_St37		1
Output configuration		3-wire
Rated specifications
Operational voltage		10 ... 30 V DC
commutation frequency		0 ... 440 Hz (switch point mode) 0 ... 10 Hz (window mode, switching point mode with stability alert)
Deadband		typ. 3 %
Polarity reversal protection		reverse polarity safeguarded
Overcurrent protection		pulsing
voltage loss		= 0.5 V
Operational current		0 ... 200 mA
Non-conducting current		0 ... 0.5 mA typ. 60 µA at 25 °C
No-load input current		= 20 mA
Delay time prior to availability		max. 150 ms
Uniform magnetic field		200 mT
Oscillating magnetic field		200 mT
Voltage functioning indicator		LED, green
Condition indicator		LED, yellow
Parameters related to functional safety
MTTF_d		701 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Connection point
Type of interface		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device ID		0x201003 (2101251)
data transfer rate		COM2 (38.4 kBit/s)
Minimum cycle time		2.3 ms
process data range		procedural information entry (control system aspect): 2 Bit procedural information output (control system side): not applicable
SIO mode support		yes
Compatible master port classification		A
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
Ingress protection rating		II
	Nominal insulation voltage	60 V
	Rated surge voltage withstand capability	800 V
UL certification		cULus Certified, Standard Use Class 2 power supply
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Ambient storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical characteristics
Linkage method		plug connector M12 x 1, 4-contact
Housing material		GD-ZnAl4Cu1, coated mounting bracket PA6-GF35
detection surface		PA 6 Grivory GVN-35H
Protection等级		IP67
Mass		180 g
Measurements
	Height	40 mm
	Width	40 mm
	Length	67 mm
Default configurations
Factory configuration		functioning mode = switching point mode with stability alert switching function = normally open (NO) activation distance = 20 mm

Classifications

Configuration	Classification code
ECLASS 13.0	27274001
ECLASS 12.0	27274001
ECLASS 11.0	27270101
ECLASS 10.0.1	27270101
ECLASS 9.0	27270101
ECLASS 8.0	27270101
ECLASS 5.1	27270101
ETIM 9.0	EC002714
ETIM 8.0	EC002714
ETIM 7.0	EC002714
ETIM 6.0	EC002714
ETIM 5.0	EC002714
UNSPSC 12.1	39121550