Inductive Sensor Pepperl+Fuchs SJ15-WS

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Overall specifications
transition function		normally open (NO)
Output configuration		Two-wire
Slot width		15 mm
Lateral immersion depth		18.5 ... 20.5 mm
Output configuration		AC
Output configuration		2-wire
Rated specifications
Operational voltage		20 ... 253 V AC
commutation frequency		0 ... 25 Hz
Deadband		typ. 5%
voltage loss		Typ. 4 V at 40 ... 500 mA load current Typical 5 V at 15 ... 40 mA load current Typ. 7 V at 5 ... 15 mA load conditions
voltage reduction at I_L
	Voltage reduction I_L = 200mA, actuating element activated	3.5 V
Transient current (20 ms, 0.1 Hz)		max. 4000 mA
Operational current		5 ... 500 mA
Non-conducting current		= 2 mA
Parameters related to functional safety
MTTF_d		1553 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Adherence to standards and directives
Compliance with standards
	Standards	EN IEC 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Standard Use
CCC certification		Approved by China Compulsory Certification (CCC)
Environmental conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical characteristics
Linkage method		cable PVC , 2 m
cross section of the core		0.75 mm²
Housing material		PBT
Protection等级		IP67
Measurements
	Height	60 mm
	Width	30 mm
	Length	48 mm
Note		¹⁾ In the temperature range below 0 °C, the allowable functioning voltage U_b 80...253 V Safety fuse = 2 A (fast-acting) as per IEC 60127-2 Sheet 1 Recommendation: after a short circuit, verify that the device is functioning properly