Photoelectric Sensor Pepperl+Fuchs BB10-P-F2/33/35/59/102/115-7m
Pepperl+Fuchs Categories
Photoelectric Sensor BB10-P-F2/33/35/59/102/115-7m
Brand: Pepperl+Fuchs
Product Code:
Datasheet excerpt: Technical data of BB10-P-F2/33/35/59/102/115-7m
| Item Specification |
|---|
| Compact photoelectric sensor featuring a plug-in type housing designed for installation in a 13 mm opening |
Classifications
| System elements | ||
|---|---|---|
| Emitter | BB10-T-F2/33/35/115-7m | |
| Receiver | BB10-R-F2/33/35/59/102/115-7m | |
| Overall specifications | ||
| Operational sensing range | 0 ... 3 m | |
| detection range threshold | 4 m | |
| illumination source | IRED | |
| Illumination type | modulated infrared light at 880 nm | |
| Size of the illumination spot | approximately 350 mm at a separation of 3 m | |
| angle of opening | Emitter: +/- 3 ° Transducer: +/- 10 ° at maximum sensing distance; typical | |
| optical surface | frontal | |
| Ambient light threshold | halogen illumination 100000 Lux; in accordance with EN 60947-5-2:2007 | |
| Parameters related to functional safety | ||
| MTTFd | 795 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Indicators/operation controls | ||
| operation indicator | Red LED: illuminates upon receiving the light beam; flashes when functioning reserve is inadequate; OFF when the light beam is interrupted | |
| Electrical parameters | ||
| Operational voltage | 10 ... 30 V DC | |
| No-load input current | Emitter: = 20 mA Transducer: = 10 mA |
|
| Output | ||
| Type of switch | dark-on | |
| Output signal | 1 NPN output, protected against short circuits, safeguarded against reverse polarity, open collector | |
| Switching voltage level | max. 30 V DC | |
| Switching capacity | max. 100 mA | |
| voltage loss | = 1.5 V DC | |
| commutation frequency | 100 Hz | |
| reaction time | 5 ms | |
| Compliance | ||
| Product specification | EN 60947-5-2 | |
| Certifications and approvals | ||
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| UN/ECE Regulation No. 10 (E1) | Certification number: 036938 | |
| Environmental conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F), permanent installation -20 ... 60 °C (-4 ... 140 °F), portable |
|
| Ambient storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Comparative moisture content | 90 %, non-condensing | |
| Mechanical characteristics | ||
| Protection等级 | IP67 | |
| Linkage | 7 m stationary cable Transducer: gray; Emitter: black |
|
| Material | ||
| Housing | PC , black | |
| optical surface | synthetic panel | |
| Mass | approximately 100 g per unit | |
| Measurements | ||
| Length | 22 mm | |
| Diameter | 12.5 mm | |
Download Specification for BB10-P-F2/33/35/59/102/115-7m
Download PDFRELATED PRODUCTS