Photoelectric Sensor Pepperl+Fuchs DoorScan-DS-4P-1600
Pepperl+Fuchs Categories
Photoelectric Sensor DoorScan-DS-4P-1600
Brand: Pepperl+Fuchs
Product Code:
Datasheet excerpt: Technical data of DoorScan-DS-4P-1600
| Item Specification |
|---|
| Light curtain for personal safety of automatic doors in compliance with DIN 18650/EN 16005, complete system intended for doors up to 1600 mm wide, NPN output |
Classifications
| Overall specifications | ||
|---|---|---|
| Minimum detection range | 0 ... 1500 mm | |
| Maximum detection range | 0 ... 3500 mm (Upright CA test specimen) | |
| detection range | 1400 mm at a mounting height of 2100 mm | |
| illumination source | IRED 850 nm | |
| Black-white contrast (6 %/90 %) | < 2 % at 2000 mm sensor range | |
| Beam count | 20 | |
| Operation mode | Background assessment | |
| Size of the illumination spot | 8 cm at a sensor range of 2000 mm | |
| Parameters related to functional safety | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 112.7 a | |
| task duration (TM) | 10 a | |
| Indicators/operation controls | ||
| operation indicator | Transducer: Red LED: detection, operational margin, error code Connection point: Red LED: detection, functioning margin, error code Yellow LED: teach status Green indicator LED: no status Green indicator LED: DIP switch indicator |
|
| control components | learning key , DIP switch for selection of functioning modes | |
| Electrical parameters | ||
| Operational voltage | 24 V DC +/- 20 % | |
| No-load input current | max. 320 mA | |
| Energy usage | 7.7 W | |
| Input | ||
| Verification input | high state = 15 V low state = 2 V | |
| Control interface | Standby active at U = 11 V DC at 30 V DC | |
| Output | ||
| Type of switch | light-on |
|
| Output signal | configurable NPN or PNP, protected against short circuits | |
| Switching voltage level | max. 30 V DC | |
| Switching capacity | max. 100 mA | |
| reaction time | = 52 ms = 200 ms in boost functioning mode |
|
| Compliance | ||
| Safety functionality | ISO 13849-1 ; EN 61508 part1-4 | |
| Product specification | EN 12978 | |
| Certifications and approvals | ||
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | |
| Mechanical characteristics | ||
| Housing length L | 1600 mm | |
| mounting height | max. 3500 mm | |
| Protection等级 | IP54 (upon installation) | |
| Linkage | Socket terminal featuring a 6-wire connection cable | |
| Material | ||
| Housing | Aluminum / PA | |
| optical surface | PC (PC (polycarbonate)) | |
| Mass | approx. 2760 g | |
| Measurements | (W x H x D) : 42 mm x 1600 mm x 37 mm | |
| Height | 42 mm | |
| Depth | 37 mm | |
| Length | 1600 mm | |
| Overview information | ||
| Contents of shipment | Sensor system for the hinge side and leading edge side, featuring 4 emitter and receiver modules for each side, 1 interface module, connecting cable, 2 housing profiles and optical covers for each side, along with 4 end caps | |
Download Specification for DoorScan-DS-4P-1600
Download PDFRELATED PRODUCTS