Photoelectric Sensor Pepperl+Fuchs LGS17

Pepperl+Fuchs Categories

Photoelectric Sensor LGS17

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of LGS17

Classifications

Item Specification
Automation safety light curtain featuring a beam spacing of 17 mm, equipped with an IO-Link interface, push-pull output, and a permanent cable with M12 connector

Overall specifications
Operational sensing range		Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m
detection range threshold		Standard : 7.5 m Option /35: 10 m
illumination source		IRED
Illumination type		modulated infrared light at 850 nm
field elevation		see Table 1, max. 3200 mm
Beam intersection		Factory configuration: three beam crossing, can be disabled
Beam suppression		adjustable max. 2 fixed suppressible light beams (blanking)
Beam separation		16.67 mm
Beam count		see Table 1, max. 193
Operation mode		Emitter: Emitter power configurable in two settings
imaging resolution		without beam overlap: 17 mm with beam overlap: 8.5 mm within 25% and 75% of the range
angle of opening		10 °
Ambient light threshold		> 50000 Lux (when the external light source is positioned outside the opening angle)
Parameters related to functional safety
MTTF_d		25 a
task duration (T_M)		20 a
Diagnostic Range (DC)		60 %
Indicators/operation controls
Operational status indicator		Power on: green LED, continuously illuminated, undervoltage indicator: green LED, pulsating (approx. 0.8 Hz), short-circuit: green LED flashing (approx. 4 Hz)
operation indicator		Emitter: Yellow LED, activates at high emission intensity, turns off at low emission intensity Transducer: Yellow LED: lights up when an object is detected and flashes when nearing the operational limit (4 Hz) Error notification: Yellow LED blinks (8 Hz) in both emitter and receiver
control components		Transducer: 2 tactile buttons for configuration
Parameterization signal		IO-Link communication: green LED turns off momentarily (1 Hz)
Electrical parameters
Operational voltage		18 ... 30 V DC
Ripple		10 %
No-load input current		Emitter =: 50 mA Transducer: = 150 mA (in idle state without outputs)
Delay time prior to availability		see Table 1, max. 3 s
Connection point
Type of interface		IO-Link
Protocol		IO-Link V1.0
Mode		COM2 (38.4 kBit/s)
Input
Verification input		Deactivation of emitter with +UB or 0 V at pin 4 (transmitter)
Input function		Range input activation begins at 1.6 m (or 2 m for option /35) with +UB or 0 V applied to pin 2 (transmitter) Teach-In interface for configuration on pin 8 (receiver)
Output
Stability fault indication output		Stability Control (SC) 1 PNP, featuring short-circuit protection and reverse polarity protection on pin 2 (receiver)
Type of switch		Factory setting: dark mode enabled, switchable to light mode
Output signal		Switching output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit safeguarded, reverse polarity safeguarded on pin 4 (receiver) Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity safeguarded on pin 5, pin 6, pin 7 (receiver)
activation threshold		Factory setting: The signal tracking for the threshold value is turned off, enhancing the optical resolution by up to 4 mm; can be switched to enable active signal tracking
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 2 V DC
commutation frequency		see Table 1, max. 129 Hz
reaction time		see Table 1, max. 16 ms
Timing feature		Post-delay adjustable from 0 ... 1.25 s in 5 ms increments (configuration through IO-Link only)
Compliance
Communication interface		IEC 61131-9
Product specification		EN 60947-5-2
Certifications and approvals
Ingress protection rating		III ( IEC 61140 )
UL certification		cULus Certified
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		Standard : -10 ... 60 °C (14 ... 140 °F) Option /146: -30 ... 60 °C (-22 ... 140 °F)
Ambient storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Mechanical characteristics
Conductor cross-sectional area		min. 0.25 mm²
Housing length L		see Table 1, max. 3360 mm
Protection等级		IP67
Linkage		Emitter: connection cable featuring 4-pin, M12 x 1 connector, 330 mm overall length Transducer: connecting cable with 8-pin, M12 x 1 connector , 350 mm total length
Material
	Housing	extruded aluminum profile, silver anodized
	optical surface	synthetic panell, polycarbonate
Mass		see Table 1, max. 1750 g (per profile)
Measurements
	Width	20 mm
	Depth	30.5 mm
Cable duration		max. 30 m