Photoelectric Sensor Pepperl+Fuchs M12/MV12-F1/76b/82b/115/128

Pepperl+Fuchs Categories

Photoelectric Sensor M12/MV12-F1/76b/82b/115/128

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of M12/MV12-F1/76b/82b/115/128

Classifications

Item Specification
Durable thru-beam sensor suitable for standard applications, compact design, 25 m detection range, red light, emission frequency F1, light/dark ON function, push-pull output, stability alarm output, test input, external Teach-In, and a permanent cable

System elements
Emitter		M12-F1/76b/115
Receiver		MV12-F1/82b/115/128
Overall specifications
Operational sensing range		0 ... 16 m
detection range threshold		25 m
illumination source		2 LED
Illumination type		modulated red light in the visible spectrum , 660 nm
Target dimensions		min. 12 mm
Alignment tool		LED red located in the receiver
Size of the illumination spot		approximately 420 mm at a distance of 16 m
angle of opening		1.5 °
Ambient light threshold
	constant illumination	40000 Lux
	Modulated illumination	5000 Lux
Parameters related to functional safety
MTTF_d		570 a
task duration (T_M)		20 a
Diagnostic Range (DC)		90 %
Indicators/operation controls
Operational status indicator		Green LED, blinks in the event of a short circuit
operation indicator		2 yellow LEDs for operation status, reserve indication, Teach-In functionality, and contrast detection mode
control components		Rotary switch for light/dark functionality, 5-position switch for adjusting contrast detection
Difference detection thresholds		15% - transparent glass bottles 25 % - polymer films 40 % - colored glass or non-transparent materials modifiable via Teach-In button or external wire
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load input current		Emitter: = 35 mA Transducer: = 45 mA
Input
Verification input		Emitter shutdown at 0 V
Input function		External Teach-In interface (ET)
Output
Stability fault indication output		1 PNP, disabled when the level drops below the functioning reserve after approximately 5 s Automatically disabled if the beam is broken 4 times during the flash duration
Type of switch		switchable light/dark on
Output signal		1 push-pull (4 in 1) output, protected against short circuits, reverse polarity protection included
Switching voltage level		max. 30 V DC
Switching capacity		max. 0.2 A
voltage loss		= 2.5 V DC
commutation frequency		1000 Hz
reaction time		0.5 ms
Compliance
Product specification		EN 60947-5-2
Adherence to standards and directives
Compliance with standards
	Resistance to shock and impact	IEC / EN 60068. half-sine, 40 g in each X, Y, and Z axes
	vibration durability	IEC / EN 60068-2-6. Sinusoidal. 10 - 150 Hz, 5 g in each of the X, Y, and Z axes
Certifications and approvals
Ingress protection rating		II, rated voltage = 300 V AC with pollution degree 1-2 according to IEC 60664-1
UL certification		cULus
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Ambient storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		2500 mm stationary cable , PUR
Material
	Housing	Frame: nickel-plated, die-cast zinc, Lateral components: fiberglass-reinforced plastic PC
	optical surface	synthetic panel
Mass		120 g (transmitter and receiver)
Measurements
	Height	49 mm
	Width	41.5 mm
	Depth	15 mm