Photoelectric Sensor Pepperl+Fuchs MLV41-LL-RT-IO/92/136

Pepperl+Fuchs Categories

Photoelectric Sensor MLV41-LL-RT-IO/92/136

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of MLV41-LL-RT-IO/92/136

Classifications

Item Specification
Durable fiber optic sensor for glass fiber applications, featuring an IO-Link interface, red light, push-pull output, and M12 connector

Overall specifications
detection range		on black (6 %): maximum range of 36 mm on Kodak white, reflectance factor 90% up to 120 mm with LLR 04-1.6-0.5-WC3 fiber optic cable
modification range		0 ... 120 mm on Kodak white, reflectivity factor 90%
Reference point		100 mm x 100 mm on Kodak white, reflectance factor 90%
illumination source		LED
Illumination type		modulated red light in the visible spectrum , 660 nm
Parameters related to functional safety
MTTF_d		770 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green, continuously illuminated Power on, Undervoltage indicator: Green LED, flashing (approximately 0.8 Hz), short-circuit: LED green flashing (approx. 4 Hz) , IO-Link communication: green LED turns off momentarily (1 Hz)
operation indicator		Yellow indicator LED, illuminates when the receiver is active; blinks when the functioning reserve is insufficient
control components		Sensitivity calibration
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load input current		max. 40 mA
Connection point
Type of interface		IO-Link
Protocol		IO-Link V1.0
Mode		COM2 (38.4 kBit/s)
Output
Type of switch		light/dark on
Output signal		2 push-pull (4 in 1) outputs, supplementary, short-circuit resistant, protected against reverse polarity
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 2.5 V DC
commutation frequency		1000 Hz
reaction time		0.5 ms
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
Ingress protection rating		II, rated voltage = 50 V AC with pollution degree 1-2 according to IEC 60664-1 functional insulation acc. to DIN EN 50178
UL certification		cULus Certified 57M3 (Only in conjunction with UL Class 2 power supply; Type 1 enclosure)
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Ambient storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical characteristics
Fiber optic connector		04
Protection等级		IP67
Linkage		4-pin, M12 x 1 connector
Material
	Housing	Aluminum , Delta-Seal coated
	optical surface	Fiber optic link
	Connector device	metal
Mass		50 g
Measurements
	Height	56.5 mm
	Width	31 mm
	Depth	13.6 mm