Photoelectric Sensor Pepperl+Fuchs MotionScan
Pepperl+Fuchs Categories
Datasheet excerpt: Technical data of MotionScan
| Item Specification |
|---|
| Combined sensor for access and safety |
Classifications
| Overall specifications | ||
|---|---|---|
| Detection area | AIR, adjustable, overall field: 2400 mm x 1000 mm (WxD) for a mounting height of 2200 mm | |
| Detection area | Radar sensor 2500 mm x 4000 mm (d x w) at a mounting height of 2200 mm and a 45° angle | |
| Maximum detection range | 0 ... 3200 mm | |
| illumination source | 3 Series | |
| Illumination type | modulated infrared light | |
| adjustment angle | -8 ... 4 ° | |
| Operating frequency range | 24.15 ... 24.25 GHz K-Band , Radar sensor | |
| Transmitter emitted power (EIRP) | < 20 dBm | |
| Parameters related to functional safety | ||
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 339.83 a | |
| Diagnostic Range (DC) | 81.52 % | |
| Indicators/operation controls | ||
| operation indicator | LED green/blue/red/orange | |
| control components | DIP switch | |
| control components | Sensitivity calibration | |
| Parameterization signal | LED blinks in adjustment mode Fast orange | |
| Electrical parameters | ||
| Operational voltage | 12 ... 24 V DC / 12 ... 24 V AC +/- 10%, 50 - 60 Hz | |
| No-load input current | = 80 mA at 24 V DC = 150 mA at 12 V: | |
| Energy usage | 2.5 VA | |
| Input | ||
| Trigger current | at 24 V DC 6 mA | |
| Verification input | active with +VB | |
| Output 1 | ||
| Output configuration | Infrared optoisolator | |
| Switching voltage level | 48 V DC | |
| Switching capacity | 300 mA resistive circuit | |
| delay in a de-energized state | 0.5 s | |
| Type of switch | light/dark on programmable selectable | |
| reaction time | 100 ms to 200 ms | |
| Output 2 | ||
| Output configuration | radar, switching device | |
| Switching voltage level | 48 V DC | |
| Switching capacity | 100 mA resistive load | |
| delay in a de-energized state | 1.5 s | |
| Type of switch | programmable normally open/normally closed | |
| reaction time | 100 ms to 200 ms | |
| Compliance | ||
| Safety functionality | ISO 13849-1 | |
| Product specification | EN 12978 | |
| Certifications and approvals | ||
| CE compliance | 2014/53/EU This device can be used in all countries within the European Union. In other countries, all applicable national regulations must be observed. | |
| FCC certification | No - Usage in North America is not allowed | |
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Functional temperature range | -20 ... 60 °C (-4 ... 140 °F) | |
| Ambient storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Comparative moisture content | max. 80 % | |
| Mechanical characteristics | ||
| mounting height | max. 3200 mm | |
| Protection等级 | IP54 (upon installation) | |
| Linkage | plug 8-pin , Connecting cable included in the shipment | |
| Material | ||
| Housing | ABS | |
| Mass | approx. 260 g | |
| Measurements | (W x H x D) 265 mm 60 mm 43 mm | |
| Height | 60 mm | |
| Width | 265 mm | |
| Depth | 43 mm | |
| Note | Please consult the package insert for details on the proper mounting and installation of the sensor | |
| Overview information | ||
| Contents of shipment | sensor , cable , 2 screws , installation assistance , Instruction leaflet | |
| Suitable series | ||
| Series | MotionScan | |
Download Specification for MotionScan
Download PDFRELATED PRODUCTS