Photoelectric Sensor Pepperl+Fuchs narrow

Pepperl+Fuchs Categories

Photoelectric Sensor narrow

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of ECHO-D-NA black narrow

Classifications

Item Specification
Standard radar-based motion detector with fundamental capabilities, detection range of 4 m x 2 m, maximum installation height of 4 m, black enclosure, solid-state relay, and cable connection

Overall specifications
detection range		4000 x 2000 mm (DxW) at a mounting height of 2200 mm and an inclination angle of 30°
functioning principle		Microwave component
Detection rate		min. 0.05 m/s
adjustment angle
	Angular displacement	-40 ... 40 ° in 5 ° steps
	Tilt angle	0 ... 90 ° in 5 ° intervals
Operating frequency range		24.075 ... 24.175 GHz K-Band
Operation mode		Radar-based motion detector
Transmitter emitted power (EIRP)		< 20 dBm
Parameters related to functional safety
MTTF_d		696 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
operation indicator		detection : LED green push button indicator: Yellow indicator LED / green
control components		Push button for selecting functioning modes: sensitivity, direction detection, cross-traffic filtering, slow-motion operation, relay type switching, hold time, immunity
Electrical parameters
Operational voltage		12 ... 24 V DC ± 10 %
No-load input current		= 55 mA at 24 V DC
Energy usage		= 1.32 W
Output
Type of switch		Normally open/closed (NO/NC)
Output signal		solid-state relay
Switching voltage level		max. 28 V AC / 36 V DC
Switching capacity		max. 0.1 A AC / 0.1 A DC
Retention duration		1.5 s / 3 s
Certifications and approvals
FCC certification		FCC ID: VECAP97 This device adheres to part 15 of the FCC regulations. Its operation is conditional on the following two requirements: (1) This device may not cause harmful interference, and (2) This device must tolerate any interference encountered, including interference that could lead to unintended operation
Integrated Circuit approval		IC ID: 10506A-AP97 This device adheres to RSS-210 regulations set by Industry Canada. Its operation is contingent upon the following two conditions: (1) this device must not generate harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Environmental conditions
Functional temperature range		-20 ... 55 °C (-4 ... 131 °F)
Ambient storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Comparative moisture content		max. 90% non-condensing
Mechanical characteristics
mounting height		max. 4 m
Protection等级		IP54
Linkage		Linkage cable 2.5 m included in the package
Material
	Housing	PC (PC (polycarbonate))
Mass		approx. 70 g
Measurements		75 mm x 64 mm x 50 mm
	Height	64 mm
	Width	75 mm
	Depth	50 mm