Photoelectric Sensor Pepperl+Fuchs OBE10M-18GF60-S2PP-0,3M-V1-IR

Pepperl+Fuchs Categories

Photoelectric Sensor OBE10M-18GF60-S2PP-0,3M-V1-IR

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OBE10M-18GF60-S2PP-0,3M-V1-IR

Classifications

Item Specification
Through-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 push-pull outputs, permanent cable with M12 plug

System elements
Emitter		OBE10M-18GF60-S-0,3M-V1-IR
Receiver		OBE10M-18GF60-2PP-0,3M-V1-IR
Overall specifications
Operational sensing range		0 ... 10 m
detection range threshold		12 m
illumination source		IRED
Illumination type		modulated infrared light at 850 nm
Size of the illumination spot		approx. 1500 mm at a distance of 10 m
angle of opening		Emitter: ± 5 ° ; Transducer: ± 10 °
optical surface		frontal
Ambient light threshold		10000 Lux
Included accessories		Securing nuts
Parameters related to functional safety
MTTF_d		606 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		Emitter: LED green: Power activated
operation indicator		Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked
Electrical parameters
Operational voltage		10 ... 30 V DC
No-load input current		Emitter: = 17 mA Transducer: = 13 mA
Ingress protection rating		Class III
Input
Verification input		Emitter shutdown at 0 V
Output
Type of switch		Q - Pin4: NPN configuration is normally open / dark-on, while PNP configuration is normally closed / light-on /Q - Pin2: NPN configuration normally closed / light-activated, PNP configuration normally open / dark-activated
Output signal		2 push-pull (4 in 1) outputs, safeguarded against short circuits, protected from reverse polarity
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 1.5 V DC
commutation frequency		80 Hz
reaction time		6 ms
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
CE compliance		CE
UKCA compliance		UKCA
UL certification		E87056, cULus Certified, Class 2 power supply, type rating 1
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Comparative moisture content		90 %, non-condensing
Mechanical characteristics
Protection等级		IP67 / IP68
Linkage		stationary cable equipped with a 4-pin M12 x 1 connector Emitter: black ; Transducer: grey
Material
	Housing	PC , black
	optical surface	synthetic panel
Cable
	Length	0.3 m
Mass		approx. 25 g for each unit
Measurements
	Length	59 mm
	Diameter	18 mm
	Thread dimension	M18