Photoelectric Sensor Pepperl+Fuchs OBE2000-R3-SE0-P

Pepperl+Fuchs Categories

Photoelectric Sensor OBE2000-R3-SE0-P

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OBE2000-R3-SE0-P

Classifications

Item Specification
Through-beam sensor for typical applications, compact design, 2000 mm detection range, red illumination, dark-on mode, NPN output, and 2 m permanently attached cable

System elements
Emitter		OBE2000-R3-S-P
Receiver		OBE2000-R3-E0-P
Overall specifications
Operational sensing range		Extended range mode: 0 ... 2 m High accuracy mode: 0 ... 200 mm
detection range threshold		Long-range mode: 2.5 m High accuracy mode: 300 mm
illumination source		LED
Illumination type		modulated red light in the visible spectrum , 630 nm
Angular displacement		approx. 2 °
Size of the illumination spot		Extended range mode: 150 mm at a range of 2000 mm High precision mode: 0.5 mm at a range of 50 mm
angle of opening		approx. 2 °
optical surface		frontal
Ambient light threshold		EN 60947-5-2 : 30000 Lux
Parameters related to functional safety
MTTF_d		806 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green, continuously illuminated Power on, short-circuit: LED green blinking (approximately 4 Hz)
operation indicator		Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked
Electrical parameters
Operational voltage		10 ... 30 V DC , class 2
No-load input current		Emitter: = 11 mA Transducer: = 8 mA
Input
Control interface		Emitter selection BK: not connected, Long Range mode BK: 0 V, High Precision mode
activation threshold		Teach-In interface
Output
Type of switch		Non-contact / closed position
Output signal		1 NPN output, protected against short circuits, safeguarded against reverse polarity, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 50 mA, resistive load
voltage loss		= 1.5 V DC
commutation frequency		approx. 800 Hz
reaction time		600 µs
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		cULus certified, Class 2 power supply
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Ambient storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		2 m permanently attached cable
Material
	Housing	PC/ABS and thermoplastic polyurethane
	optical surface	PC
	Cable	PUR
Mass		approx. 20 g per sensor
Measurements
	Height	26 mm
	Width	7.5 mm
	Depth	13.8 mm
Cable duration		2 m