Photoelectric Sensor Pepperl+Fuchs OBG5000-R100-E5-V3

Pepperl+Fuchs Categories

Photoelectric Sensor OBG5000-R100-E5-V3

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OBG5000-R100-E5-V3

Classifications

Item Specification
Retroreflective detector featuring a polarization filter for precise object recognition

Overall specifications
Operational sensing range		0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
reflector spacing		0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
detection range threshold		6 m
Reference point		H85-2 reflective surface
illumination source		LED
Illumination type		modulated red light in the visible spectrum
LED risk category labeling		exemption category
Size of the illumination spot		approx. 170 mm at a distance of 3.5 m
angle of opening		approx. 5 °
Ambient light threshold		EN 60947-5-2
Parameters related to functional safety
MTTF_d		600 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		Green indicator LED: Constantly illuminated - power activated Flashing (4 Hz) - short circuit
operation indicator		Yellow LED: Constantly illuminated - unobstructed light path Permanently off - entity detected Flashing (4 Hz) - inadequate operational reserve
control components		learning key
control components		5-position rotary switch for selecting functioning modes
Difference detection thresholds		10 % - clean, water-filled PET bottles 18% - transparent glass containers 40 % - colored glass or non-transparent materials Configurable using a rotary switch
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load input current		< 25 mA at 24 V supply voltage
Ingress protection rating		III
Output
Type of switch		The sensor features an adjustable switching type. The factory default setting is: Q - Pin4: PNP normally open / dark-activated
Output signal		1 PNP, safeguarded against short circuits, protected from reverse polarity
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA, resistive load
Usage category		DC-12 and DC-13
voltage loss		= 1.5 V DC
commutation frequency		500 Hz
reaction time		1 ms
Compliance
Communication interface		IEC 61131-9
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		E87056, cULus Certified, Class 2 power supply, type rating 1
Environmental conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical characteristics
Protection等级		IP67 / IP69 / IP69K
Linkage		M8 x 1 plug, 3-pin
Material
	Housing	PC (PC (polycarbonate))
	optical surface	PMMA
Mass		approx. 10 g
Measurements
	Height	44.5 mm
	Width	11 mm
	Depth	21.5 mm