Photoelectric Sensor Pepperl+Fuchs OBR10M-R202-K6-4R


Pepperl+Fuchs Categories

Photoelectric Sensor Pepperl+Fuchs obr10m-r202-k6-4r

Photoelectric Sensor OBR10M-R202-K6-4R

Brand: Pepperl+Fuchs
Product Code:

Share on:

Datasheet excerpt: Technical data of  OBR10M-R202-K6-4R

Overall specifications
Operational sensing range0 ... 10 m
reflector spacing0.05 ... 10 m
detection range threshold12 m
Reference pointH85-2 reflective surface
illumination sourceLED
Illumination typemodulated red light in the visible spectrum
LED risk category labelingexemption category
polarizing filteryes
Size of the illumination spotapproximately 300 mm at a distance of 10 m
angle of opening2 °
Ambient light thresholdEN 60947-5-2 : 60000 Lux
Parameters related to functional safety
MTTFd642 a
task duration (TM)20 a
Diagnostic Range (DC)0 %
Indicators/operation controls
Operational status indicatorLED green: power activated
operation indicatorYellow LED:
Constantly illuminated - unobstructed light path
Permanently off - entity detected
Flashing (4 Hz) - inadequate operational reserve
Flashing (8 Hz) - fault identified, the outputs retain their status
control components
Electrical parameters
Operational voltage24 ... 240 V AC/DC
No-load input current< 30 mA at 24 V supply voltage
Ingress protection ratingII
Nominal insulation voltage250 V
Rated surge voltage withstand capability2500 V
Energy usage= 3.5 VA
FuseSafety fuse = 2 A (time-delay) in accordance with IEC 60127-2 Sheet 1
Recommendation: after a short circuit, verify that the device is functioning properly
Output
Type of switchQ - BK: normally open / dark active
/Q - GY: normally closed / illuminated
C - WH: Common
Output signalRelay, 1 alternator
Switching voltage levelmax. 240 V AC/DC
Switching capacitymax. 2.5 A, refer to section characteristic curve
Conversion powerDC: max. 95 W AC: max. 600 VA
Usage categoryDC-12 , DC-13 , AC-12 u. AC-140
commutation frequency25 Hz
reaction time= 20 ms
Compliance
Product specificationEN 60947-5-2 , EN 60947-1
Certifications and approvals
UL certificationE87056, cULus certified
Environmental conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F), cable, permanently installed
-20 ... 60 °C (-4 ... 140 °F), flexible cable unsuitable for use with conveyor chains
Ambient storage temperature-40 ... 70 °C (-40 ... 158 °F)
Contamination level3
Mechanical characteristics
Protection等级IP67
Linkage2 m permanently attached cable
Material
HousingPC (PC (polycarbonate))
optical surfacePMMA
Massapprox. 120 g
Measurements
Height62 mm
Width20 mm
Depth42 mm
Cable duration2 m

Classifications

ConfigurationClassification code
ECLASS 13.027270902
ECLASS 12.027270902
ECLASS 11.027270902
ECLASS 10.0.127270902
ECLASS 9.027270902
ECLASS 8.027270902
ECLASS 5.127270902
ETIM 9.0EC002717
ETIM 8.0EC002717
ETIM 7.0EC002717
ETIM 6.0EC002717
ETIM 5.0EC002717
UNSPSC 12.139121528

Download Specification for OBR10M-R202-K6-4R

Download PDF
Sensor Accessory REF-H85-2

  • Brand: Pepperl+Fuchs
  • Product Code:

Sensor Accessory REF-C110-2

  • Brand: Pepperl+Fuchs
  • Product Code:

Sensor Accessory REF-H50

  • Brand: Pepperl+Fuchs
  • Product Code:

Sensor Accessory OFR-100/100

  • Brand: Pepperl+Fuchs
  • Product Code:

RELATED PRODUCTS