Photoelectric Sensor Pepperl+Fuchs OQR50M-R300-2EP-V1

Pepperl+Fuchs Categories

Photoelectric Sensor OQR50M-R300-2EP-V1

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OQR50M-R300-2EP-V1

Classifications

Item Specification
Retroreflective detector employing measurement core technology

Overall specifications
Operational sensing range		0 ... 50 m
reflector spacing		0.2 ... 50 m
Reference point		3 x REF-H100
illumination source		LED
Illumination type		modulated red light in the visible spectrum
LED risk category labeling		exemption category
Angular displacement		max. ± 2°
Measurement technique		Pulse Ranging Technology (PRT)
Size of the illumination spot		approximately 16 cm x 18 cm at a range of 10 m
Ambient light threshold		50000 Lux
Parameters related to functional safety
MTTF_d		100 a
task duration (T_M)		10 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green
operation indicator		2 yellow LEDs for status indication
learning confirmation indicator		Teach-In: LED green/yellow alternating flash; 2.5 Hz Teach Error: LED green/yellow alternating flashing; 8.0 Hz
control components		5-position rotary switch for selecting functioning modes (threshold configuration and mode selection)
control components		Selector for configuring the threshold values
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		10 % within the supply tolerance
No-load input current		= 80 mA / 24 V DC
Delay time prior to availability		< 0.7 s, for temperatures <-30°C adherence to the specification is required 5 mins after powering on
Output
Output signal		2 push-pull (4 in 1) outputs, safeguarded against short circuits, protected from reverse polarity
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
commutation frequency		50 Hz
reaction time		5 ms
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		E87056, cULus Certified, Class 2 power supply, type rating 1
Environmental conditions
Ambient temperature		-40 ... 55 °C (-40 ... 131 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		4-pin, M12 x 1 connector
Material
	Housing	Plastic ABS
	optical surface	PMMA
Mass		90 g
Measurements
	Height	88 mm
	Width	25.8 mm
	Depth	54.3 mm