Photoelectric Sensor Pepperl+Fuchs SU19.1/110/115a

Pepperl+Fuchs Categories

Photoelectric Sensor SU19.1/110/115a

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of SU19.1/110/115a

Classifications

Item Specification
Classic Series fiber optic sensor featuring a display, slave module, push-pull output, and a permanent cable with M8 coupling

Overall specifications
detection range		up to 150 mm (KLR-C02-2,2-2,0-K146)
Detection distance		up to 450 mm (KLE-C01-2,2-2,0-K116)
illumination source		LED
Illumination type		modulated red light in the visible spectrum , 660 nm
Ambient light threshold		10000 Lux
Group installation		up to 20 units
Parameters related to functional safety
MTTF_d		500 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		Power on: constant illumination, Undervoltage indicator: Green LED, pulsing (approximately 0.8 Hz), short-circuit: LED green flashing (approximately 4 Hz)
Diagnostics marker		7-segment display
operation indicator		Yellow indicator LED: steady illumination indicates switching status, blinks when the functioning reserve is insufficient
control components		Button (Mode) for menu selection; Button (Set) for Teach-In; Button (Up/Down) for precision adjustment and parameter configuration
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		10 %
No-load input current		= 30 mA
Output
Type of switch		light/dark on programmable selectable
Output signal		1 push-pull (4 in 1) output NPN/PNP, protected against short circuits
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA, resistive load
voltage loss		= 2 V DC at 100 mA ; = 0.7 V at 10 mA
commutation frequency		High speed mode: 16 kHz, Standard mode: 3 kHz, Elevated resolution: 250 Hz ~ 3 kHz (sensor-selected), Automatic: 250 Hz, Glass mode: 250 Hz
reaction time		High-speed mode: 30 µs, standard mode: 160 µs, high resolution: 2 ms, automatic: 160 µs ~ 2 ms (selected by the sensor), glass mode: 2 ms
Repeatability accuracy		= 0.5 % of adjusted sensor range
Timing feature		ON-delay, OFF-delay, single shot, pulse extension; adjustable from 0 to 999 ms in 1 ms increments
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		cULus Certified, Class 2 Power Supply, Type 1 enclosure
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-10 ... 55 °C (14 ... 131 °F)
Ambient storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical characteristics
Protection等级		IP50
Linkage		200 mm PVC cable featuring a 4-pin M8 coupling
Material
	Housing	PC
Mass		45 g
Measurements
	Height	34.5 mm
	Width	9 mm
	Depth	62.3 mm