Photoelectric Sensor Pepperl+Fuchs VDM18-100/32/105/122

Pepperl+Fuchs Categories

Photoelectric Sensor VDM18-100/32/105/122

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of VDM18-100/32/105/122

Classifications

Item Specification
Universal distance sensor for object measurement, 100 mm detection range, red laser light, laser class 2, PNP output, analog output, control input, and M12 connector

Overall specifications
Measurement range		30 ... 100 mm
illumination source		laser diode typ. service life 50,000 h at Ta = +40 °C
Illumination type		modulated red light in the visible spectrum
Laser specified ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser category	2
	Wavelength	650 nm
Illumination point depiction		approximately 1.5 mm x 3.25 mm at a distance of 100 mm
Measurement technique		Laser triangulation method
Ambient light threshold		= 5000 Lux
Rated specifications
Non-linearity error		0.25 % of the measuring range
Repeatability accuracy		< 0.25 % of the measured value
Accuracy		< 0.1 % of the measuring range
Temperature variation		< 0.02 % / °C
Indicators/operation controls
Operational status indicator		LED green
operation indicator		2 yellow LEDs: Output switching status (each output), 4 green LEDs: Operational mode
control components		Control panel: Adjuster for set point, functioning mode, analog output (S - Set, T - Toggle)
Parameterization signal		LED red
Electrical parameters
Operational voltage		18 ... 30 V DC
No-load input current		= 40 mA at 24 V DC
Ingress protection rating		II, nominal voltage = 50 V DC
Delay time prior to availability		= 300 ms
Input
Control interface		Laser off (HIGH +UB) , Keypad lock (LOW 0 V)
Output
Output signal		1 PNP output, safeguarded against short circuits, protected against reverse polarity, open collector
Switching capacity		max. 100 mA
Output measurement		1 analog output 4 ... 20 mA, protected against short-circuit and overload, Rmax = 500 Ohm
commutation frequency		= 1 kHz
reaction time		0.4 ms
Adherence to standards and directives
Compliance with directives
	EMC Regulation 2004/108/EC	EN 60947-5-2
Compliance with standards
	Laser category	DIN EN 60825-1:2008, IEC 60825-1:2007
Certifications and approvals
UL certification		cULus Certified
Certifications		CE, cULus
Environmental conditions
Ambient temperature		-10 ... 60 °C (14 ... 140 °F)
Ambient storage temperature		-20 ... 80 °C (-4 ... 176 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		5-pin M12 x 1 plastic connector
Material
	Housing	ABS, shock-resistant
	optical surface	PMMA
Mass		approx. 43 g
Measurements
	Height	50 mm
	Width	17 mm
	Depth	50 mm