Photoelectric Sensor Pepperl+Fuchs VDM18-300/20/122/151


Pepperl+Fuchs Categories

Photoelectric Sensor Pepperl+Fuchs vdm18-300-20-122-151

Photoelectric Sensor VDM18-300/20/122/151

Brand: Pepperl+Fuchs
Product Code:

Share on:

Datasheet excerpt: Technical data of  VDM18-300/20/122/151

Classifications

Item Specification
Universal distance sensor for object measurement, 300 mm detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, M12 plug
Overall specifications
Measurement range80 ... 300 mm
illumination sourcelaser diode
typ. service life 50,000 h at Ta = +40 °C
Illumination typemodulated red light in the visible spectrum
Laser specified ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser category2
Wavelength650 nm
Illumination point depictionapproximately 2 mm x 4.5 mm at 300 mm
Measurement techniqueLaser triangulation method
Ambient light threshold= 5000 Lux
Rated specifications
Non-linearity error0.25 % of the measuring range
Repeatability accuracy< 0.25 % of the measured value
Accuracy< 0.1 % of the measuring range
Temperature variation< 0.02 % / °C
Indicators/operation controls
Operational status indicatorLED green
operation indicator2 yellow LEDs: Output switching status (each output), 4 green LEDs: Operational mode
control componentsControl panel: Adjuster for set point, functioning mode, analog output (S - Set, T - Toggle)
Parameterization signalLED red
Electrical parameters
Operational voltage18 ... 30 V DC
No-load input current= 40 mA at 24 V DC
Ingress protection ratingII, nominal voltage = 50 V DC
Delay time prior to availability= 300 ms
Output
Output signal2 PNP outputs, separate
Switching capacitymax. 100 mA
Output measurement1 analog output 4 ... 20 mA, protected against short-circuit and overload, Rmax = 500 Ohm
commutation frequency= 1 kHz
reaction time0.4 ms
Adherence to standards and directives
Compliance with directives
EMC Regulation 2004/108/ECEN 60947-5-2
Compliance with standards
Laser categoryDIN EN 60825-1:2008, IEC 60825-1:2007
Certifications and approvals
UL certificationcULus Certified
Environmental conditions
Ambient temperature-10 ... 60 °C (14 ... 140 °F)
Ambient storage temperature-20 ... 80 °C (-4 ... 176 °F)
Mechanical characteristics
Protection等级IP67
LinkageM12 connector, 8-pole
Material
HousingABS, shock-resistant
optical surfacePMMA
Massapprox. 43 g
Measurements
Height50 mm
Width17 mm
Depth50 mm

Download Specification for VDM18-300/20/122/151

Download PDF
Sensor Accessory OMH-VDM18-01

  • Brand: Pepperl+Fuchs
  • Product Code:

Sensor Accessory OMH-VDM18-02

  • Brand: Pepperl+Fuchs
  • Product Code:

RELATED PRODUCTS