Inductive Sensor Turck

TURCK CATEGORIES

Inductive Sensor Turck BI2-M08K-VP6X 7M

Design: Screwed barrel    • Electrical Connection: Cable
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product BI2-M08K-VP6X 7M Information
  ✔ Screwed barrel, M8 x 1   ✔ Brass with a nickel plating   ✔ Wide sensing range   ✔ DC four-wire, 10…30 VDC   ✔ Switching contact, PNP output   ✔ Cable interface

Inductive Sensor Turck NI3-M08K-VP6X-H1341

Design: Screwed barrel    • Electrical Connection: Connector, M12 × 1
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product NI3-M08K-VP6X-H1341 Information
  ✔ Screwed barrel, M8 x 1   ✔ Brass with a nickel plating   ✔ Wide sensing range   ✔ DC four-wire, 10…30 VDC   ✔ Switching contact, PNP output   ✔ M12 x 1 plug connector

Inductive Sensor Turck BI15-M30-AN6X 7M

Design: Screwed barrel    • Electrical Connection: Cable
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product BI15-M30-AN6X 7M Information
  ✔ M30 × 1.5 screw tube   ✔ Chrome-coated brass   ✔ Wide sensing range   ✔ DC three-wire, 10…30 VDC   ✔ NPN output, no contact   ✔ Cable interface

Inductive Sensor Turck NI25-CK40-IOLU69X2-H1141

Design: Rectangular    • Electrical Connection: Connector, M12 × 1
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product NI25-CK40-IOLU69X2-H1141 Information
  ✔ Height, rectangular 40 mm   ✔ Active face orientation adjustable in 5 directions   ✔ Plastic, PBT-GF30-V0   ✔ Intense brightness corner LEDs   ✔ Optimal visibility of supply voltage and switching condition from any angle   ✔ Setup and interaction through IO-Link v1.1 or conventional I/O   ✔ Configurable distance parameter in 12-bit IO-Link process data   ✔ Switchpoint adjustable through two teaching points   ✔ Switching output signal signal can be configured flexibly   ✔ Identification via 32-byte memory   ✔ Temperature surveillance with configurable thresholds   ✔ 4-wire, 15…30 VDC   ✔ Analog output signal signal 0…10 V (configurable to 2…10 V)   ✔ M12 × 1 plug

Inductive Sensor Turck NI15-EG30-Y1X/S100 7M

Design: Screwed barrel    • Electrical Connection: Cable
Protection Class: IP67    • Ambient Temperature: -25…+100 °C
Product NI15-EG30-Y1X/S100 7M Information
  ✔ Screwed barrel, M30 x 1.5   ✔ Corrosion-resistant steel, 1.4301   ✔ Temperatures reaching up to +100 °C   ✔ DC two-wire, nom. 8.2 VDC   ✔ Output in accordance with DIN EN 60947-5-6 (NAMUR)   ✔ Cable interface   ✔ ATEX classification II 1 G, Ex Zone 0 for maximum temperatures of +80 °C   ✔ ATEX category II 2 G. Ex Zone 1   ✔ ATEX classification II 1 D, Ex Zone 20 for maximum temperatures of +70°C   ✔ SIL 2 (Low Demand Mode) in accordance with IEC 61508, PL c in accordance with ISO 13849-1 at HFT0   ✔ SIL 3 (All Demand Mode) per IEC 61508, PL e per ISO 13849-1 with redundant configuration HTF1

Inductive Sensor Turck RI360P1-DSU35-CNX4-2H1650

   • Electrical Connection: Connector, M12 × 1
Protection Class: IP68/IP69K    • Ambient Temperature: -25…+70 °C
Product RI360P1-DSU35-CNX4-2H1650 Information
  ✔ Housing DSU35, rectangular   ✔ Plastic, PP-GF30-VO   ✔ Identifying angular positions ranging from 0° to 360°   ✔ CANopen protocol   ✔ Baud rate ranging from 10 kbps to 1 Mbps; Default configuration: 125 kbps   ✔ Node address 1 to 127; Default setting 3   ✔ Termination resistor activated through CANopen device access   ✔ Resistant to electromagnetic disturbance   ✔ 10 … 30 VDC   ✔ M12 x 1 plug, 5-pin, CAN input, CAN output   ✔ Acc. to CiA DS-301, CiA 305, CiA 406

Inductive Sensor Turck RI360P1-DSU35TC-ELI-EXI

   • Electrical Connection: Connection chamber
Protection Class: IP68/IP69K    • Ambient Temperature: -25…+70 °C
Product RI360P1-DSU35TC-ELI-EXI Information
  ✔ Housing DSU35, rectangular   ✔ Plastic, PP-GF30-VO   ✔ Identifying angular positions ranging from 0° to 360°   ✔ P1-Ri-DSU35 positioning component included in the shipment   ✔ Measurement range configurable through a switch located in the Connection chamber   ✔ Resistant to electromagnetic disturbance   ✔ 12-bit accuracy   ✔ 2-conductor, 14…30 VDC   ✔ Analog output signal signal   ✔ 4 … 20 mA   ✔ Connection chamber   ✔ ATEX category II 2 G, Ex Zone 1   ✔ ATEX category II 2 D, Ex Zone 21

Inductive Sensor Turck BI4-M12-2APS8X2-H1141

Design: Screwed barrel    • Electrical Connection: Connector, M12 × 1
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product BI4-M12-2APS8X2-H1141 Information
  ✔ M12 × 1 screw-type housing   ✔ Brass with a nickel plating   ✔ SIL 2 (IEC 61508)   ✔ PL d (ISO 13849-1)   ✔ 2 x output signal switching device (OSSD), normally open (NO) contact, PNP   ✔ DC four-wire, 24 VDC

Inductive Sensor Turck BI5-M18-IOLU69X2-H1141

Design: Screwed barrel    • Electrical Connection: Connector, M12 × 1
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product BI5-M18-IOLU69X2-H1141 Information
  ✔ Screwed barrel, M18 x 1   ✔ Chrome-coated brass   ✔ Setup and interaction through IO-Link v1.1 or conventional I/O   ✔ Configurable distance parameter in 12-bit IO-Link process data   ✔ Switchpoint adjustable through two teaching points   ✔ Switching output signal signal can be configured flexibly   ✔ Identification via 32-byte memory   ✔ Temperature surveillance with configurable thresholds   ✔ 4-wire, 15…30 VDC   ✔ Analog output signal signal 0…10 V (configurable to 2…10 V)   ✔ M12 × 1 plug

Inductive Sensor Turck BI2-M12-ADZ31X 7M

Design: Screwed barrel    • Electrical Connection: Cable
Protection Class: IP67    • Ambient Temperature: -25…+70 °C
Product BI2-M12-ADZ31X 7M Information
  ✔ M12 × 1 screw-type housing   ✔ Chrome-coated brass   ✔ AC 2-wire, 20…250 VAC   ✔ DC two-wire, 10…300 VDC   ✔ Short-circuit resistant   ✔ NO contact   ✔ Cable interface