Inductive Sensor Ifm IF6028


IFM CATEGORIES

Inductive Sensor Ifm if6028

Inductive Sensor IF6028

Brand: Ifm
Product Code: IFK4002A1PKG/IO/US

  • Accurate linearized output signal
  • Extremely high repeatability
  • For distance measurement without physical contact
  • Broad operating temperature value spectrum
  • Durable metal enclosure designed for harsh industrial conditions

Share on:

Product characteristics

Electrical engineering design PNP/NPN; (customizable)
Output feature typically open / closed; (customizable)
communication interface IO-Link
Housing Screw-type
measurements[mm] M12 x 1 / L = 70
Voltage for operation[V] 15...30 DC
Current draw[mA] < 30
Safety feature rating II
Reverse polarity safeguard yes
Surrounding temperature value[°C] -25...80
Safety feature IP 65; IP 66; IP 67; IP 68; IP 69K
Items provided
lock nuts: 2

Tests / approvals

Weight[g] 30
Housing Screw-type
Installation recessed installation compatible
measurements[mm] M12 x 1 / L = 70
Thread specification M12 x 1
Substance enclosure: brass with white bronze finish; sensing surface: orange PBT; LED cover: PEI; locking nuts: brass with white bronze plating
Fastening torque[Nm] 7
Response duration[ms] < 10

Monitoring range

Measuring span[mm] 0.2...2
IO-Link for switch points[mm] 0.38...1.87
Electrical engineering design PNP/NPN; (customizable)
Output feature typically open / closed; (customizable)
Max. voltage drop at switching output DC[V] 2.5
Continuous current rating of the switching output DC[mA] 100
DC switching frequency[Hz] 200
Analog current output[mA] 4...20; (linear; slope: 8.889 mA/mm; for front approach and for target composed of mild steel: 12 x 12 x 1 mm)
Max. capacity[O] 500; (Ub <=18 V;; Max. capacity <=400 O)
Overcurrent protection yes
Overcurrent protection yes
Adjustment coefficient steel: 1 / stainless steel: 0.7 / brass: 0.4 / aluminum: 0.3 / copper: 0.2
Hysteresis[% of Sr] 3...15
Comment on hysteresis
customizable
Linearity error of analog output[%] ± 1; (of the ultimate measurement range value)
Reproducibility analog output[%] ± 1; (of the ultimate measurement range value)
Temperature sensitivity[%/K of the reference value] ±0,15
Temperature variation ± 5 %; (of the ultimate measurement range value)
communication interface IO-Link
Mode of transmission COM2 (38,4 kBaud)
IO-Link version 1.1
SDCI specification IEC 61131-9
Configurations Intelligent Sensor: Identification and Fault Detection; Multi-channel, two setpoint switching sensor, Type 0 Generic Profiled Sensor; Learning Channel
SIO mode yes
Necessary master port category A
Minimum process cycle duration[ms] 3.2
IO-Link cyclic process data
Operationbit length
measured value16
device status4
two-state switching data2
IO-Link acyclical functions switching cycles counter; switch-on cycle tally; runtime counter; internal temperature value; application-specific label
Supported DeviceIDs>
Mode of operationDeviceID
default1205
Note
For additional details, please refer to the IODD PDF document in the "Downloads" section
Display
target within the measurement range4 x LED, yellow indicators
aim beyond the measuring range4 x LED, yellow blinking

Download Specification for IF6028

Download PDF

RELATED PRODUCTS