Level Sensor Ifm LMC510

IFM CATEGORIES

Level Sensor LMC510

Brand: Ifm
Product Code: LMFCE-N12E-QSKG-1/US

For dependable level management in tanks and containers
Two customizable switching outputs, one featuring an IO-Link communication interface
Configured for oil and oil-based substances
Straightforward process integration using a screw-in adapter
Dependable elimination of deposits or foam

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Quantity of digital outputs: 2

default configuration

oils; oil-derived materials

Connection for process

1/2" NPT

System

gold-plated terminals

Media

water; aqueous fluids; oils; oil-based liquids; coolants; powder

Not suitable for

Refer to the operating manual, section "Operation and features"

Intermediate temperature value[°C]

-25...100

Length of probe[mm]

Pressure in the tank

-1...40 bar

-0.1...4 MPa

MAWP (for uses in compliance with CRN)[bar]

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

2.3

Supported DeviceIDs

Mode of operation	DeviceID
default	675

Display

Switching condition	LED, yellow
operational condition	LED, green

Operating conditions

Surrounding temperature value[°C]	-25...85
Temperature for storage[°C]	-40...85
Safety feature	IP 68; IP 69K; (7 days / 1 m water depth / 0.1 bar: IP 68)
default configuration	oils; oil-derived materials

Inputs / outputs

Total count of inputs and outputs	Quantity of digital outputs: 2
Voltage for operation[V]	18...30 DC
Current draw[mA]	< 35
Safety feature rating	III
Reverse polarity safeguard	yes
Overall count of outputs	2
Output response	output signal; IO-Link
Electrical engineering design	PNP/NPN
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2.5
Continuous current rating of the switching output DC[mA]	50; (100 (...60 °C))
Overcurrent protection	yes
Method of overcurrent protection	thermal, pulsed mode
Overcurrent protection	yes
Response duration[s]	< 0.5
Weight[g]	115
measurements[mm]	Ø 18.11 / L = 76.2
Substance	stainless steel (1.4404 / 316L); PEEK; PEI; FKM
Substances (contacted components)	stainless steel (1.4404 / 316L); PEEK; FKM
Connection for process	1/2" NPT