Pressure Sensor Ifm PE2599

IFM CATEGORIES

Pressure Sensor PE2599

Brand: Ifm
Product Code: PE-1-1BREG14-MFRKG/US/ /E

Dual switching outputs, with one customizable as IO-Link and the other as an analog output
Red/green indicator for easy recognition of the acceptable range
The process connection is adjustable for optimal alignment
Features long-term stability due to robust overload protection
Sturdy construction for application in demanding industrial settings

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Count of digital outputs: 2; Count of analog outputs: 1

Measuring span

-1...1 bar

-1000...1000 mbar

-14.5...14.5 psi

-100...100 kPa

Connection for process

screw connection G 1/4 with outdoor thread and internal thread: M5; DIN EN ISO 1179-2

System

gold-plated terminals

Sensing element

ceramic capacitive force per unit area sensing element

Application

for commercial applications

Media

fluids and gases

Intermediate temperature value[°C]

-25...80

Minimum force per unit area before bursting

30000 mbar

435 psi

3000 kPa

Pressure classification

10000 mbar

145 psi

1000 kPa

Vacuum strength

-1000 mbar

-0.1 MPa

Kind of force per unit area

relative force per unit area

Response duration[ms]

< 1.5

Programmable delay time dS, dr[s]

0...50

Damping process parameter dAP[s]

0...4

Damping for the analog output dAA[s]

0...4

Max. response duration for analog output[ms]

Software / programming

Configuration options

hysteresis / threshold; typically open / default closed; activation/deactivation delay; damping; display module; current/voltage output

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

2.3

Supported DeviceIDs

Mode of operation	DeviceID
default	467

Measuring span

-1...1 bar

-1000...1000 mbar

-14.5...14.5 psi

-100...100 kPa

Setpoint SP

-985...1000 mbar

-14.3...14.5 psi

-98.5...100 kPa

Reset threshold rP

-995...990 mbar

-14.45...14.4 psi

-99.5...99 kPa

Analog initiation point

-1000...600 mbar

-14.5...8.7 psi

-100...60 kPa

Analog endpoint

-600...1000 mbar

-8.7...14.5 psi

-60...100 kPa

In increments of

5 mbar

0.05 psi

0.5 kPa

Inputs / outputs

Total count of inputs and outputs	Count of digital outputs: 2; Count of analog outputs: 1
Voltage for operation[V]	18...30 DC; (to SELV/PELV)
Current draw[mA]	< 35
Minimum insulation resistance[MO]	100; (500 V DC)
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	0.3
Built-in watchdog	yes
Overall count of outputs	2
Output response	output signal; analog output; IO-Link; (customizable)
Electrical engineering design	PNP/NPN
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2
Continuous current rating of the switching output DC[mA]	250
DC switching frequency[Hz]	< 500
Total analog outputs	1
Analog current output[mA]	4...20; (adjustable 1:5)
Max. capacity[O]	500
Analog voltage output[V]	0...10; (expandable 1:5)
Minimum load resistance[O]	2000
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Precision of switch points/span>[% of the span]	< ± 0,4; (Turn down 1:1)
Reproducibility[% of the span]	< ± 0,1; (with temperature value fluctuations < 10 K; Turn down 1:1)
Characteristics variation[% of the span]	< ± 0.25 (BFSL) / < ± 0.5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis variation[% of the span]	< ± 0,1; (Turn down 1:1)
Extended stability[% of the span]	< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient value for the zero reference[% of the span / 10 K]	0,2; (-25...80 °C)
Temperature coefficient value for the range[% of the span / 10 K]	0,2; (-25...80 °C)
Comments on the precision / variation	accuracy of switch points, linearity deviation per DNV GL: < ± 1%: < ± 1%
Surrounding temperature value[°C]	-25...80
Temperature for storage[°C]	-40...100
Safety feature	IP 65; IP 67