Pressure Sensor Ifm PN2014

IFM CATEGORIES

Pressure Sensor PN2014

Brand: Ifm
Product Code: PN-016-RER14-MFRKG/US/ /V

Dual switching outputs, with one customizable as IO-Link and the other as an analog output
Red/green indicator for easy recognition of the acceptable range
The process connection is adjustable for optimal alignment
Features long-term stability due to robust overload protection
Sturdy construction for application in demanding industrial settings

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Count of digital outputs: 2; Count of analog outputs: 1

Measuring span

-1...16 bar

-14.6...232 psi

-0.1...1.6 MPa

Connection for process

screw connection G 1/4 with internal thread (DIN EN ISO 1179-2)

System

gold-plated terminals

Sensing element

ceramic capacitive force per unit area sensing element

Application

for commercial applications

Media

fluids and gases

Intermediate temperature value[°C]

-25...80

Minimum force per unit area before bursting

150 bar

2200 psi

15 MPa

Pressure classification

85 bar

1250 psi

8.5 MPa

Vacuum strength

-1000 mbar

-0.1 MPa

Kind of force per unit area

relative force per unit area

Response duration[ms]

< 1.5

Programmable delay time dS, dr[s]

0...50

Damping process parameter dAP[s]

0...4

Damping for the analog output dAA[s]

0...4

Max. response duration for analog output[ms]

Software / programming

Configuration options

hysteresis / threshold; typically open / default closed; activation/deactivation delay; damping; display module; current/voltage output

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor ED2: Digital Measurement Sensor (0x000A), Identification and Fault Detection (0x4000)

SIO mode

yes

Necessary master port category

A; (when pin 2 not connected: B)

Minimum process cycle duration[ms]

IO-Link force per unit area accuracy[bar]

0.002

IO-Link cyclic process data

Operation	bit length
force per unit area	16
device status	4
two-state switching data	2

IO-Link acyclical functions

application-specific label

Supported DeviceIDs

Mode of operation	DeviceID
default	1200

Note

For additional details, please refer to the IODD PDF document in the "Downloads" section

Measuring span

-1...16 bar

-14.6...232 psi

-0.1...1.6 MPa

Setpoint SP

-0.87...16 bar

-12.6...232.1 psi

-0.087...1.6 MPa

Reset threshold rP

-0.95...15.92 bar

-13.8...230.9 psi

-0.095...1.592 MPa

Analog initiation point

-1...12.8 bar

-14.5...185.6 psi

0.128...1.28 MPa

Analog endpoint

2.2...16 bar

31.9...232.1 psi

0.22...1.6 MPa

Minimum difference between set point (SP) and reference point (rP)

0.08 bar

1.2 psi

0.008 MPa

In increments of

0.01 bar

0.1 psi

0.001 MPa

Inputs / outputs

Total count of inputs and outputs	Count of digital outputs: 2; Count of analog outputs: 1
Voltage for operation[V]	18...30 DC; (to SELV/PELV)
Current draw[mA]	< 35
Minimum insulation resistance[MO]	100; (500 V DC)
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	0.3
Built-in watchdog	yes
Overall count of outputs	2
Output response	output signal; analog output; IO-Link; (customizable)
Electrical engineering design	PNP/NPN
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2
Continuous current rating of the switching output DC[mA]	250
DC switching frequency[Hz]	< 500
Total analog outputs	1
Analog current output[mA]	4...20; (adjustable 1:5)
Max. capacity[O]	500
Analog voltage output[V]	0...10; (expandable 1:5)
Minimum load resistance[O]	2000
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Precision of switch points/span>[% of the span]	< ± 0,4; (Turn down 1:1)
Reproducibility[% of the span]	< ± 0,1; (with temperature value fluctuations < 10 K; Turn down 1:1)
Characteristics variation[% of the span]	< ± 0.25 (BFSL) / < ± 0.5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis variation[% of the span]	< ± 0,1; (Turn down 1:1)
Extended stability[% of the span]	< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient value for the zero reference[% of the span / 10 K]	< ± 0,2; (-0...80 °C)
Temperature coefficient value for the range[% of the span / 10 K]	< ± 0,2; (-0...80 °C)
Comments on the precision / variation	accuracy of switch points, linearity deviation per DNV GL: < ± 1%: < ± 1%
Surrounding temperature value[°C]	-25...80
Temperature for storage[°C]	-40...100
Safety feature	IP 65; IP 67