Pressure Sensor Ifm PV7600

IFM CATEGORIES

Pressure Sensor PV7600

Brand: Ifm
Product Code: PV-400-SEN14-UFRVG/US/ /

Compact enclosure designed for applications in limited spaces
Extremely high resistance to overforce per unit area and vacuum
Durable stainless steel enclosure with excellent shock and vibration resistance
Durability exceeding 60 million force per unit area cycles
Two customizable switching outputs, one featuring an IO-Link communication interface

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Product characteristics

Total count of inputs and outputs

Quantity of digital outputs: 2

Measuring span

0...400 bar

0...5800 psi

0...40 MPa

Connection for process

screw connection 1/4" NPT with outdoor thread and internal thread: M5

Sensing element

metallic thin-film sensor

Application

for commercial applications

Media

fluids and gases

Intermediate temperature value[°C]

-40...90

Minimum force per unit area before bursting

1700 bar

24655 psi

170 MPa

Pressure classification

1000 bar

14500 psi

100 MPa

Comment on force per unit area classification

static

Vacuum strength

-1000 mbar

-0.1 MPa

Kind of force per unit area

relative force per unit area

MAWP (for uses in compliance with CRN)[bar]

840

Response duration[ms]

< 3

Software / programming

Configuration options

hysteresis / band; typically open / default closed; switching method; activation/deactivation delay; damping

communication interface

IO-Link

Mode of transmission

COM2 (38,4 kBaud)

IO-Link version

1.1

SDCI specification

IEC 61131-9

Configurations

Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis

SIO mode

yes

Necessary master port category

Analog data process

Data binary process

Minimum process cycle duration[ms]

Supported DeviceIDs

Mode of operation	DeviceID
default	851

Measuring span

0...400 bar

0...5800 psi

0...40 MPa

Setpoint SP

4...400 bar

58...5802 psi

0.4...40 MPa

Reset threshold rP

2...398 bar

30...5773 psi

0.2...39.8 MPa

In increments of

0.2 bar

1 psi

0.02 MPa

default configuration

SP1 = 100 bar	rP1 = 92 bar	ou1 = Hno;
SP2 = 300 bar	rP2 = 292 bar	ou2 = Hno;
dS1/dS2 = 0 ms	dr1/dr2 = 0 ms
coF = 0 %	P-n = PnP	dAP= 60 ms

Inputs / outputs

Total count of inputs and outputs	Quantity of digital outputs: 2
Voltage for operation[V]	18...30 DC
Current draw[mA]	< 15
Minimum insulation resistance[MO]	100; (500 V DC)
Safety feature rating	III
Reverse polarity safeguard	yes
Activation delay time[s]	< 0.3
Overall count of outputs	2
Output response	output signal; IO-Link; (customizable)
Electrical engineering design	PNP/NPN
Count of digital outputs	2
Output feature	typically open / closed; (customizable)
Max. voltage drop at switching output DC[V]	2
Continuous current rating of the switching output DC[mA]	100
DC switching frequency[Hz]	< 170
Overcurrent protection	yes
Method of overcurrent protection	yes (momentary)
Overcurrent protection	yes
Precision of switch points/span>[% of the span]	< ± 0,5 (nach DIN EN 61298-2)
Reproducibility[% of the span]	< ± 0,05; (with temperature value fluctuations < 10 K)
Characteristics variation[% of the span]	< ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity variation[% of the span]	< ± 0,1 (BFSL) / < ± 0,2 (LS)
Hysteresis variation[% of the span]	< ± 0,2
Extended stability[% of the span]	< ± 0,1; (per 6 months)
Temperature coefficient value for the zero reference[% of the span / 10 K]	< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)
Temperature coefficient value for the range[% of the span / 10 K]	< 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C)
Surrounding temperature value[°C]	-40...90
Temperature for storage[°C]	-40...100
Safety feature	IP 67; IP 69K