Inductive Sensor Pepperl+Fuchs NBB15-U1K-E2-3G-3D
Pepperl+Fuchs Categories
Contact via Zalo
Phone call
Datasheet excerpt: Technical data of NBB15-U1K-E2-3G-3D
| Overall specifications | ||
|---|---|---|
| transition function | normally open (NO) | |
| Output configuration | PNP | |
| Specified functioning distance | 15 mm | |
| mounting | flush | |
| Output configuration | DC | |
| Guaranteed functioning distance | 0 ... 12.15 mm | |
| Actual sensing distance | 13.5 ... 16.5 mm typ. 15 mm | |
| diminution factor rAl | 0.33 | |
| diminution factor rCu | 0.3 | |
| diminution factor r304 | 0.74 | |
| diminution factor rBrass | 0.41 | |
| Output configuration | 3-wire | |
| Rated specifications | ||
| Operational voltage | 10 ... 30 V | |
| commutation frequency | 0 ... 200 Hz | |
| Deadband | typ. 5 % | |
| Polarity reversal protection | reverse polarity safeguarded | |
| Overcurrent protection | pulsing | |
| voltage loss | = 2 V | |
| voltage reduction at IL | ||
| Voltage reduction IL = 1 mA, actuating element activated | 0.5 ... 2.3 V typ. 0.9 V | |
| Voltage reduction IL = 10 mA, actuating element activated | 0.8 ... 2.2 V typ. 1.4 V | |
| Voltage reduction IL = 20 mA, actuating element activated | 0.9 ... 2.3 V typ. 1.5 V | |
| Voltage reduction IL = 50 mA, actuating element activated | 0.9 ... 2.5 V typ. 1.6 V | |
| Voltage reduction IL = 100 mA, actuating element activated | 1 ... 2.6 V typ. 1.8 V | |
| Voltage reduction IL = 200 mA, actuating element activated | 1.2 ... 2.8 V typ. 2 V | |
| Operational current | 0 ... 200 mA | |
| Non-conducting current | 0 ... 0.5 mA typ. 0.01 mA | |
| Non-conducting current IU =40 °C, deactivating the switching element | = 100 µA | |
| No-load input current | = 20 mA | |
| Delay time prior to availability | 80 ms | |
| Voltage functioning indicator | LED, green | |
| State indication for switching | LED, yellow | |
| Parameters related to functional safety | ||
| MTTFd | 1242 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Adherence to standards and directives | ||
| Compliance with standards | ||
| Standards | EN IEC 60947-5-2 | |
| Certifications and approvals | ||
| IECEx certification | ||
| Equipment protection rating Gc (ec) | IECEx TUR 21.0019X | |
| Equipment protection rating Dc (tc) | IECEx TUR 21.0020X | |
| ATEX certification | ||
| Equipment protection rating Gc (ec) | TÜV 20 ATEX 8525 X | |
| Equipment protection rating Dc (tc) | TÜV 20 ATEX 8526 X | |
| UL certification | cULus Certified, Standard Use | |
| Marine certification | DNVGL TAA0000160 | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical characteristics | ||
| Linkage method | screw terminals | |
| Linkage information | Up to two conductors with identical core cross-section may be connected to a single terminal connection! torque specification 1.2 Nm + 10 % |
|
| cross section of the core | up to 2.5 mm2 , length of stripped insulation: 7 mm | |
| Minimum conductor cross-section | min. 0.5 mm2 (incl. wire-end terminals for use with flexible conductors) | |
| Maximum core cross-section area | max. 2.5 mm2 (incl. wire-end terminals for use with flexible conductors) | |
| Connection point (system side) | screw terminals, M20 x 1.5 cord grip, effective thread length 9.1 mm, maximum screw-in depth 9.1 mm | |
| Housing material | PA | |
| detection surface | PA | |
| Protection等级 | IP68 / IP69K | |
| Mass | 225 g | |
| Measurements | ||
| Height | 40 mm | |
| Width | 40 mm | |
| Length | 118 mm | |
| Note | tightening torque: 1.8 Nm (enclosure) | |
| Overview information | ||
| Usage in hazardous environments | refer to instruction manuals | |
Classifications
| Configuration | Classification code |
|---|---|
| ECLASS 13.0 | 27274001 |
| ECLASS 12.0 | 27274001 |
| ECLASS 11.0 | 27270101 |
| ECLASS 10.0.1 | 27270101 |
| ECLASS 9.0 | 27270101 |
| ECLASS 8.0 | 27270101 |
| ECLASS 5.1 | 27270101 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Download Specification for NBB15-U1K-E2-3G-3D
Download PDFRELATED PRODUCTS
Inductive Sensor NMB5-18GM55-Z0-C-FE-300MM-V1
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
Inductive Sensor NCB1,5-8GM25-N0-Y306375
- Brand: PEPPERL+FUCHS
-
Category:
Inductive Sensor -
Product Code:
