Photoelectric Sensor Pepperl+Fuchs GD18-S/GV18-S/115/120
Pepperl+Fuchs Categories
Photoelectric Sensor GD18-S/GV18-S/115/120
Brand: Pepperl+Fuchs
Product Code:
Datasheet excerpt: Technical data of GD18-S/GV18-S/115/120
| Item Specification |
|---|
| Through-beam sensor featuring M18 threaded housing design, plastic enclosure, side optical interface, 12 m detection range, red light, light/dark on function, DC version, 2 PNP outputs, and permanent cable |
Classifications
| System elements | ||
|---|---|---|
| Emitter | GD18-S/115 | |
| Receiver | GV18-S/115/120 | |
| Overall specifications | ||
| Operational sensing range | 0 ... 12 m | |
| detection range threshold | 17.5 m | |
| illumination source | LED | |
| Illumination type | modulated red light in the visible spectrum , 640 nm | |
| Size of the illumination spot | approx. 650 mm at 17.5 m | |
| angle of opening | approx. 2 ° | |
| optical surface | lateral | |
| Ambient light threshold | 30000 Lux | |
| Parameters related to functional safety | ||
| MTTFd | 630 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Indicators/operation controls | ||
| Operational status indicator | Green LED, continuously illuminated Power on | |
| operation indicator | Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked | |
| Electrical parameters | ||
| Operational voltage | 10 ... 30 V DC | |
| No-load input current | < 20 mA | |
| Output | ||
| Type of switch | light/dark on | |
| Output signal | 2 PNP, supplementary, short-circuit protected, open collectors | |
| Switching voltage level | max. 30 V DC | |
| Switching capacity | max. 100 mA | |
| voltage loss | = 1.5 V DC | |
| commutation frequency | 500 Hz | |
| reaction time | = 1 ms | |
| Compliance | ||
| Product specification | EN 60947-5-2 | |
| Certifications and approvals | ||
| Ingress protection rating | II, Nominal insulation voltage = 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| UL certification | cULus Certified, Class 2 Power Supply, Type 1 enclosure | |
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| Ambient storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical characteristics | ||
| Protection等级 | IP67 | |
| Linkage | 2 m permanently attached cable | |
| Material | ||
| Housing | PC | |
| optical surface | PMMA | |
| Mass | approx. 75 g for each unit | |
| Measurements | ||
| Length | 39.8 mm | |
| Diameter | 18 mm | |
| Thread dimension | M18 | |
Download Specification for GD18-S/GV18-S/115/120
Download PDFRELATED PRODUCTS