Photoelectric Sensor Pepperl+Fuchs LD39/LV39/32/40a/82a/116
Pepperl+Fuchs Categories
Photoelectric Sensor LD39/LV39/32/40a/82a/116
Brand: Pepperl+Fuchs
Product Code:
Datasheet excerpt: Technical data of LD39/LV39/32/40a/82a/116
| Item Specification |
|---|
| Through-beam sensor featuring a 20 m detection range, infrared light source, offering light/dark on capability, DC configuration, PNP output, Sensitivity calibration, pre-fault output, and a terminal chamber |
Classifications
| System elements | ||
|---|---|---|
| Emitter | LD39/116 | |
| Receiver | LV39/32/40a/82a/116 | |
| Overall specifications | ||
| Operational sensing range | 0 ... 20 m | |
| detection range threshold | 25 m | |
| modification range | 2 ... 25 m | |
| Reference point | receiver | |
| illumination source | LED | |
| Illumination type | modulated infrared light | |
| Ambient light threshold | IEC / EN 60947-5-2 , 10000 Lux | |
| Parameters related to functional safety | ||
| MTTFd | 800 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Indicators/operation controls | ||
| Operational status indicator | Red LED (transmitter) | |
| operation indicator | Yellow indicator LED: status indicator (receiver) LED red: pre-failure signal, blinking (receiver) |
|
| control components | Detection distance calibrator, light-on/dark-on toggle switch | |
| Electrical parameters | ||
| Operational voltage | 10 ... 30 V DC | |
| Ripple | 10 % | |
| No-load input current | = 20 mA (device) | |
| Delay time prior to availability | = 300 ms | |
| Output | ||
| Stability fault indication output | 1 PNP, triggered when there is a reduction in functioning reserve | |
| Type of switch | light/dark on | |
| Output signal | 1 PNP output, safeguarded against short circuits, protected against reverse polarity, open collector | |
| Switching voltage level | = 30 V DC | |
| Switching capacity | max. 200 mA, resistive load | |
| voltage loss | = 3 V | |
| commutation frequency | = 300 Hz | |
| reaction time | = 1.5 ms | |
| Compliance | ||
| Product specification | EN 60947-5-2 | |
| Certifications and approvals | ||
| Certifications | CE | |
| Environmental conditions | ||
| Ambient temperature | -25 ... 55 °C (-13 ... 131 °F) | |
| Ambient storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical characteristics | ||
| Protection等级 | IP54 | |
| Linkage | terminal chamber PG9, = 0.75 mm2 | |
| Material | ||
| Housing | PBT | |
| optical surface | PMMA | |
| Mass | Emitter: approx. 90 g receiver: approx. 100 g | |
| Measurements | ||
| Height | 64 mm | |
| Width | 25 mm | |
| Depth | 75 mm | |
| Overview information | ||
| Contents of shipment | installation assistance | |
Download Specification for LD39/LV39/32/40a/82a/116
Download PDFRELATED PRODUCTS