Photoelectric Sensor Pepperl+Fuchs M100/MV100-RT/35/76b/102/115-5

Pepperl+Fuchs Categories

Photoelectric Sensor M100/MV100-RT/35/76b/102/115-5

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of M100/MV100-RT/35/76b/102/115-5

Classifications

Item Specification
Through-beam sensor, 20 m detection range, red light, light/dark ON mode, DC version, NPN output, Sensitivity calibration, emitter shut-off, permanent cable

System elements
Emitter		M100-RT/35/76b/115-5M
Receiver		MV100-RT/35/102/115-5M
Overall specifications
Operational sensing range		0 ... 20 m
detection range threshold		30 m
illumination source		LED
Illumination type		modulated red light in the visible spectrum
Size of the illumination spot		approximately 2 m at a distance of 30 m
angle of opening		approx. 2 °
optical surface		frontal
Ambient light threshold		EN 60947-5-2
Parameters related to functional safety
MTTF_d		860 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green: power activated
operation indicator		Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked
control components		Sensitivity calibration
control components		Light-on/dark-on toggle switch
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load input current		Emitter: = 15 mA Transducer: = 8 mA
Input
Verification input		Emitter shutdown at 0 V
Output
Type of switch		The sensor's switching type can be modified. The factory default is: light on
Output signal		1 NPN output, protected against short circuits, safeguarded against reverse polarity, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA, resistive load
voltage loss		= 1.5 V DC
commutation frequency		250 Hz
reaction time		2 ms
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		cULus approved, Class 2 power supply or listed Power Supply featuring a limited voltage output with (possibly integrated) fuse (max. 3.3 A per UL248), Type 1 enclosure
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		5 m stationary cable
Material
	Housing	PC (PC (polycarbonate))
	optical surface	PMMA
Mass		approximately 110 g (transmitter and receiver)
Fastening torque for securing screws		0.6 Nm
Measurements
	Height	31 mm
	Width	11 mm
	Depth	20 mm
Cable duration		5 m