Photoelectric Sensor Pepperl+Fuchs M41/MV41/76a/92/102/126b

Pepperl+Fuchs Categories

Photoelectric Sensor M41/MV41/76a/92/102/126b

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of M41/MV41/76a/92/102/126b

Classifications

Item Specification
Durable thru-beam sensor with a compact housing design, 16 m detection range, emission frequency F1, red light and infrared light, dark ON mode, NPN output, stability alarm output, test input, and M12 connector

System elements
Emitter		M41/70/76a
Receiver		MV41/92/102/126b
Overall specifications
Operational sensing range		0 ... 16 m
detection range threshold		normal mode: 25 m high power mode: 35 m (control input at UB+)
illumination source		normal mode: LED High power mode: LED+IRED
Illumination type		normal mode: modulated red light in the visible spectrum High power mode: modulated red and infrared light
Size of the illumination spot		approximately 500 mm at a detection range of 16 m
angle of opening		approx. 1.5 °
optical surface		frontal
Ambient light threshold		50000 Lux
Parameters related to functional safety
MTTF_d		844 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green: power activated
operation indicator		Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked
control components		receiver sensitivity calibration
Electrical parameters
Operational voltage		10 ... 30 V DC , class 2
Ripple		max. 10 %
No-load input current		max. 30 mA
Input
Verification input		emitter shutdown at +U_B (transmitter)
Control interface		High power mode initiation with +UB (transmitter)
Output
Stability fault indication output		1 PNP, non-operational when the functioning reserve is insufficient
Type of switch		dark-on
Output signal		1 PNP, protected against short circuits, safeguarded against reverse polarity, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 2.5 V DC
commutation frequency		1000 Hz
reaction time		0.5 ms
Adherence to standards and directives
Compliance with directives
	EMC Regulation 2004/108/EC	EN 60947-5-2:2007
Compliance with standards
	Product specification	EN 60947-5-2:2007 IEC 60947-5-2:2007
	Standards	UL 508
Certifications and approvals
UL certification		cULus Certified, Class 2 Power Supply, Type 1 enclosure
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Ambient storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		4-pin, M12 x 1 connector
Material
	Housing	Aluminum , Delta-Seal coated
	optical surface	glass panel
	Connector device	metal
Mass		50 g (device)
Measurements
	Height	56.5 mm
	Width	31 mm
	Depth	13.6 mm