Photoelectric Sensor Pepperl+Fuchs OBE2000-R3-SE2-0,2M-V3-P

Pepperl+Fuchs Categories

Photoelectric Sensor OBE2000-R3-SE2-0,2M-V3-P

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OBE2000-R3-SE2-0,2M-V3-P

Classifications

Item Specification
Through-beam sensor designed for standard applications, compact form factor, 2000 mm detection range, red light source, dark on functionality, PNP output, 200 mm permanent cable with M8 coupling with three terminals

System elements
Emitter		OBE2000-R3-S-0,2M-V3-P
Receiver		OBE2000-R3-E2-0,2M-V3-P
Overall specifications
Operational sensing range		Extended range mode: 0 ... 2 m High accuracy mode: 0 ... 200 mm
detection range threshold		Long-range mode: 2.5 m High accuracy mode: 300 mm
illumination source		LED
Illumination type		modulated red light in the visible spectrum , 630 nm
Angular displacement		approx. 2 °
Size of the illumination spot		Extended range mode: 150 mm at a range of 2000 mm High precision mode: 0.5 mm at a range of 50 mm
angle of opening		approx. 2 °
optical surface		frontal
Ambient light threshold		EN 60947-5-2 : 30000 Lux
Parameters related to functional safety
MTTF_d		806 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green, continuously illuminated Power on, short-circuit: LED green blinking (approximately 4 Hz)
operation indicator		Transducer: yellow LED, illuminates when the light beam is unobstructed, blinks when the functioning reserve is low; OFF when the light beam is blocked
Electrical parameters
Operational voltage		10 ... 30 V DC , class 2
No-load input current		Emitter: = 11 mA Transducer: = 8 mA
Input
Control interface		Emitter selection BK: not connected, Long Range mode BK: 0 V, High Precision mode
Output
Type of switch		Non-contact / closed position
Output signal		1 PNP output, safeguarded against short circuits, protected against reverse polarity, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 50 mA, resistive load
voltage loss		= 1.5 V DC
commutation frequency		approx. 800 Hz
reaction time		600 µs
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		cULus certified, Class 2 power supply
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Ambient storage temperature		-30 ... 70 °C (-22 ... 158 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		200 mm static cable equipped with a 3-pin, M8 x 1 connector
Material
	Housing	PC/ABS and thermoplastic polyurethane
	optical surface	PC
	Cable	PUR
Mass		approx. 20 g per sensor
Measurements
	Height	26 mm
	Width	7.5 mm
	Depth	13.8 mm
Cable duration		200 mm