Photoelectric Sensor Pepperl+Fuchs OBT30-R3-E2-0,2M-V31-P-L
Pepperl+Fuchs Categories
Photoelectric Sensor OBT30-R3-E2-0,2M-V31-P-L
Brand: Pepperl+Fuchs
Product Code:
Datasheet excerpt: Technical data of OBT30-R3-E2-0,2M-V31-P-L
| Item Specification |
|---|
| Laser triangulation method sensor with background suppression, compact form factor for M3 mounting, 30 mm sensing range, in light on mode, PNP output, 200 mm permanent cable equipped with M8 plug, 4-pin |
Classifications
| Overall specifications | ||
|---|---|---|
| Detection distance | 7 ... 30 mm | |
| Reference point | typical white, 100 mm x 100 mm | |
| illumination source | laser diode | |
| Illumination type | modulated red light in the visible spectrum , 680 nm | |
| Laser specified ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser category | 1 | |
| Wavelength | 680 nm | |
| Beam spreading | > 5 mrad | |
| pulse duration | approx. 3 µs | |
| Repetition frequency | approx. 16.6 kHz | |
| maximum pulse energy | 9.5 nJ | |
| Black-white contrast (6 %/90 %) | < 5 % at 30 mm | |
| Size of the illumination spot | < 1 mm at a separation of 30 mm | |
| angle of opening | approx. 2 ° | |
| optical surface | frontal | |
| Ambient light threshold | EN 60947-5-2 : 30000 Lux | |
| Parameters related to functional safety | ||
| MTTFd | 800 a | |
| task duration (TM) | 20 a | |
| Diagnostic Range (DC) | 0 % | |
| Indicators/operation controls | ||
| Operational status indicator | LED green, continuously illuminated Power on, short-circuit: LED green blinking (approximately 4 Hz) | |
| operation indicator | Yellow indicator LED: activates when an object is sensed | |
| Electrical parameters | ||
| Operational voltage | 12 ... 24 V | |
| No-load input current | < 10 mA | |
| Ingress protection rating | III | |
| Output | ||
| Type of switch | Non-contact / light activated | |
| Output signal | 1 PNP output, safeguarded against short circuits, protected against reverse polarity, open collector | |
| Switching voltage level | max. 30 V DC | |
| Switching capacity | max. 50 mA, resistive load | |
| voltage loss | = 1.5 V DC | |
| commutation frequency | approx. 2 kHz | |
| reaction time | 250 µs | |
| Compliance | ||
| Product specification | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2007 | |
| Certifications and approvals | ||
| UL certification | E87056, cULus Recognized, Class 2 Power Supply | |
| CCC certification | CCC certification / marking not necessary for products rated ≤36 V | |
| FDA certification | IEC 60825-1:2007 conforms with 21 CFR 1040.10 and 1040.11, excluding deviations as stated in Laser Notice No. 50, dated June 24, 2007 | |
| Environmental conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Ambient storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Mechanical characteristics | ||
| Protection等级 | IP67 | |
| Linkage | 200 mm permanent cable with 4-pin, M8x1 connector | |
| Material | ||
| Housing | PC/ABS and thermoplastic polyurethane | |
| optical surface | PC | |
| Cable | PUR | |
| Mass | approx. 10 g | |
| Measurements | ||
| Height | 26 mm | |
| Width | 7.5 mm | |
| Depth | 13.8 mm | |
| Cable duration | 200 mm | |
Download Specification for OBT30-R3-E2-0,2M-V31-P-L
Download PDFRELATED PRODUCTS