Photoelectric Sensor Pepperl+Fuchs OBE6000-12GM40-SE4-0,1M-V31

Pepperl+Fuchs Categories

Photoelectric Sensor OBE6000-12GM40-SE4-0,1M-V31

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OBE6000-12GM40-SE4-0,1M-V31

Classifications

Item Specification
Through-beam sensor featuring an M12 threaded housing design, nickel-plated brass enclosure, 6 meter detection range, red light, adjustable sensitivity, light/dark ON mode, DC type, NPN output, 100 mm stationary cable, and M12 connector, 4-pole

System elements
Emitter		OBE6000-12GM40-S-0,1M-V31
Receiver		OBE6000-12GM40-E4-0,1M-V31
Overall specifications
Operational sensing range		0 ... 6000 mm
detection range threshold		8500 mm
modification range		500 ... 8500 mm
Reference point		receiver
illumination source		LED
Illumination type		red , 640 nm
Angular displacement		+/- 2 °
Size of the illumination spot		approximately 800 mm at a distance of 6 m Red light
angle of opening		approx. 4
optical surface		frontal
Ambient light threshold		EN 60947-5-2 ; 20000 Lux
Parameters related to functional safety
MTTF_d		806 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green: Power activated
operation indicator		Yellow indicator LED: illuminates upon detecting the light beam; flashes when functioning reserve is insufficient; OFF when the light beam is obstructed
control components		receiver sensitivity setting
Electrical parameters
Operational voltage		10 ... 30 V DC , class 2
Ripple		10 %
No-load input current		= 30 mA (emitter and receiver)
Input
Control interface		indicator active +UB dark on: 0 V
Output
Type of switch		light/dark electrically switchable
Output signal		1 NPN output, protected against short circuits, safeguarded against reverse polarity, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 2 V
commutation frequency		= 1000 Hz
reaction time		0.5 ms
Compliance
Product specification		EN 60947-5-2
Adherence to standards and directives
Compliance with standards
	Standards	UL 508
Certifications and approvals
UL certification		cULus Certified, Class 2 Power Supply, Type 1 enclosure
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Certifications		CE, cULus Certified 57M3 (Applicable only with UL Class 2 power supply; Type 1 enclosure)
Environmental conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		100 mm rigid cable equipped with a 4-pin M8 coupling
Material
	Housing	brass with a nickel coating
	optical surface	PMMA
Mass		approximately 25 g (device)
Measurements
	Length	45 mm
	Diameter	12 mm
Cable duration		100 mm