Photoelectric Sensor Pepperl+Fuchs OMR50M-R1000-SSI-V1V1B-T

Pepperl+Fuchs Categories

Photoelectric Sensor OMR50M-R1000-SSI-V1V1B-T

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of OMR50M-R1000-SSI-V1V1B-T

Classifications

Item Specification
Proximity sensor for positioning applications with millimeter accuracy, PRT, measuring range up to 50 m, SSI/RS-422 interface, M12 connector

Overall specifications
Measurement range		0.3 ... 50 m
Reference point		REF-500MMx500MM (Foil reflector 500 mm x 500 mm) REF-250MMx250MM (Film reflector 250 mm x 250 mm)
illumination source		laser diode
Illumination type		modulated red light in the visible spectrum
Laser specified ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser category	1
	Wavelength	660 nm
	Beam spreading	< 5 mrad
	pulse duration	5 ns
	Repetition frequency	300 kHz
	maximum pulse energy	< 2 nJ
Measurement technique		Pulse Ranging Technology (PRT)
Maximum motion speed		15 m/s
Size of the illumination spot		< 25 cm at 50 m
Ambient light threshold		> 80000 Lux
Accuracy		0.1 mm, variable
Thermal impact		0.03 mm/K
Parameters related to functional safety
MTTF_d		> 100 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
operation indicator		6 LEDs
control components		Control panel (4 membrane buttons) for parameter configuration
Parameterization signal		Backlit display for presenting measured values and configuration settings
Electrical parameters
Operational voltage		10 ... 30 V DC
No-load input current		660 mA (18 V) ... 400 mA (30 V)
Delay time prior to availability		< 1 s
Connection point
Type of interface		SSI
Monostable time		20 µs
Clock rate		0.1 ... 1 MHz
Linkage 1
Type of interface		RS-422
data output rate		4.8 ... 115.2 kBit/s
I/O
I/O type		2 configurable inputs/outputs, independent setup, short-circuit protection, reverse polarity protection
Output
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA, resistive load
voltage loss		= 1.5 V DC
Compliance
Product specification		EN 60947-5-2
Laser safety		EN 60825-1:2014
Measurement precision
Output of measured value		1 ms
mean data age		3 ms, 6 ms, 12 ms, 25 ms, configurable
Absolute precision		typ. ± 2.5 mm
Repeatability accuracy		< 1 mm
Certifications and approvals
Ingress protection rating		III (insulation voltage rating of 50 V)
UL certification		cULus Certified, Class 2 Power Supply, Type 1 enclosure
FDA certification		IEC 60825-1:2007 conforms with 21 CFR 1040.10 and 1040.11, excluding deviations as stated in Laser Notice No. 50, dated June 24, 2007
Environmental conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Ambient storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Comparative moisture content		95 %, no condensation of moisture
Mechanical characteristics
Protection等级		IP67
Linkage		4-pin M12x1 connector, A-coded (power) 5-pin, M12x1 connector, B-coded (SSI)
Material
	Housing	ABS / PC
	optical surface	PMMA, scratch-resistant coated
Mass		approx. 300 g
Measurements
	Height	106.6 mm
	Width	55 mm
	Depth	80.6 mm