Photoelectric Sensor Pepperl+Fuchs PROSCAN-T-8883

Pepperl+Fuchs Categories

Photoelectric Sensor PROSCAN-T-8883

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of PROSCAN-T-8883

Classifications

Item Specification
Multi-beam sensor featuring a self-programming capability for overseeing extensive areas with e1 certification

Overall specifications
Detection area		80 mm x 80 mm , switchable 550 mm x 80 mm
illumination source		12 x IRED
Illumination type		modulated infrared light
learning duration		approx. 4 s
Beam count		1 light beam , switchable to 4 beams
Activation duration		3 s / 10 s, programmable
Parameters related to functional safety
MTTF_d		630 a
task duration (T_M)		20 a
Diagnostic Range (DC)		60 %
Indicators/operation controls
operation indicator		LED red: lit for object detection, blinks during the teaching phase
control components		Programmable switch for switch type, open duration, detection area
Electrical parameters
Operational voltage		12 ... 38 V DC
Ripple		10 %
No-load input current		100 mA
Input
Control interface		0 V = reduced detection area / +U_B = great detection field
Output
Type of switch		Output programmable for active/inactive状态
Output signal		1 PNP, protected against short circuits, safeguarded against reverse polarity, open collector
Switching voltage level		38 V DC
Switching capacity		200 mA
reaction time		< 50 ms
delay in a de-energized state		200 ms
Adherence to standards and directives
Compliance with standards
	Product specification	EN 60947-5-2
	Standards	EN 50155 Chapter 12.2.3 / 12.2.5 / 12.2.7 / 12.2.8 / 12.2.11 / 12.2.14 For further information, refer to the test report
	combustibility	Flame resistant in compliance with UN/ECE-R118 or ISO 14572
Certifications and approvals
UN/ECE Regulation No. 10 (E1)		Approval code: 046982
Environmental conditions
Ambient temperature		-25 ... 60 °C (-13 ... 140 °F)
Ambient storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical characteristics
mounting height		1000 ... 2500 mm
Protection等级		IP52
Linkage		AMP 6-pin connector, 2 m permanently attached cable
Material
	Housing	ABS
	optical surface	PMMA
Mass		approx. 100 g
Measurements
	Height	45 mm
	Width	102 mm
	Depth	32 mm
Default configurations
Function
	DIP switch	1 / 2 : ON / ON
Detection area		80 mm x 80 mm , 1 light beam (central left light beam)
Input		Control interface (SE): 0 V = reduced detection field