Sensor Accessory Pepperl+Fuchs NDP-KE2-8E2

Pepperl+Fuchs Categories

Brand: Pepperl+Fuchs
Product Code:

Share on:

Description Download Accessories

Item Specification
Inductive transmitter system

Rated specifications
Operational voltage		24 V DC ± 10 %
Number of signal channels		8
Signal transfer direction		from secondary side to primary side
Polarity reversal protection		reverse polarity safeguarded
Current draw		max. 1000 mA
Parameters related to functional safety
MTTF_d		245 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Transition state		8 x LED, yellow
Transfer indicator		LED, green
Input
Number		1
Input type		Activation input signal level: = 15 V = active, = 3 V inactive
Input current		= 1 mA
Internal resistor		= 15 kO
Output
Output configuration		1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched voltage) , overload and short-circuit resistant
voltage loss		= 2.5 V
output current		max. 50 mA
reaction time		= 200 ms ( static operation , the transmission heads stand opposite to each other )
Adherence to standards and directives
Compliance with directives
	EMC Directive 89/336/EEC	EN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
Certifications and approvals
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Ambient storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical characteristics
Protection等级		IP20
Material
	Housing	PA 66-FR
mounting		DIN rail mounting
Mass		106 g
Overview information
Note		Maximum cable length between WIS module and WIS transmitter must not exceed 5 m.