Flow Sensor Ifm SA5020
IFM CATEGORIES
Flow Sensor SA5020
Brand: Ifm
Product Code: SAD10XDBFRKG/US-100
- Simultaneous measurement of flow and temperature value
- Dependable airflow measurement
- Red/green indicator for easy recognition of the acceptable range
- Featuring switching output, analog signal, and IO-Link
- The process connection is adjustable for optimal alignment
Contact via Zalo
Phone call
Product characteristics
| Total count of inputs and outputs | Count of digital outputs: 2; Count of analog outputs: 1 | ||
| Connection for process | screw connection M18 x 1.5 internal thread | ||
| System | gold-plated terminals | ||
| Setup | Recommended for pipe diameters; ( 15...51 mm) | ||
| Media | air | ||
| Intermediate temperature value[°C] | -20...90 | ||
| Pressure classification |
| ||
| MAWP (for uses in compliance with CRN)[bar] | 100 | ||
| Response duration[s] | 7 |
Software / programming
| Configuration options | hysteresis / range; typically open / default closed; switching method; current/frequency output; medium choice; damping; teach function; display can be rotated and deactivated; norm measurement unit; measured value color | ||||||
| communication interface | IO-Link | ||||||
| Mode of transmission | COM2 (38,4 kBaud) | ||||||
| IO-Link version | 1.1 | ||||||
| SDCI specification | IEC 61131-9 | ||||||
| Configurations | Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis | ||||||
| SIO mode | yes | ||||||
| Necessary master port category | A | ||||||
| Analog data process | 2 | ||||||
| Data binary process | 2 | ||||||
| Minimum process cycle duration[ms] | 3 | ||||||
| Supported DeviceIDs |
| ||||||
| Length L of probe[mm] | 45 | ||||||
| Operational mode | relative; absolutely gaseous; (absolute: reference measurement recommended; default configuration: relative) | ||||||
| Exhibit range[m/s] | 0...36 | ||||||
| Definition of detail level[m/s] | 0.2 | ||||||
| Setpoint SP[m/s] | 2...30 | ||||||
| Reset threshold rP[m/s] | 0.6...28.6 | ||||||
| Analog initiation point ASP[m/s] | 0...24 | ||||||
| Analog endpoint AEP[m/s] | 6...30 | ||||||
| Frequency termination point, FEP[m/s] | 6.6...30 | ||||||
| Frequency at termination point FRP[Hz] | 100...1000 |
Inputs / outputs
| Total count of inputs and outputs | Count of digital outputs: 2; Count of analog outputs: 1 |
| Voltage for operation[V] | 18...30 DC; (to SELV/PELV) |
| Current draw[mA] | < 100 |
| Safety feature rating | III |
| Reverse polarity safeguard | yes |
| Activation delay time[s] | 10 |
| Measuring method | calorimetric |
| Overall count of outputs | 2 |
| Output response | output signal; analog output; frequency output; IO-Link; (customizable) |
| Electrical engineering design | PNP/NPN |
| Count of digital outputs | 2 |
| Output feature | typically open / closed; (customizable) |
| Max. voltage drop at switching output DC[V] | 2.5 |
| Continuous current rating of the switching output DC[mA] | 250 |
| Total analog outputs | 1 |
| Analog current output[mA] | 4...20; (expandable) |
| Max. capacity[O] | 350 |
| Overcurrent protection | yes |
| Method of overcurrent protection | yes (momentary) |
| Overcurrent protection | yes |
| Output frequency[Hz] | 0...1000 |
| Reproducibility | ± (3 % MW + 0,6 % MEW) |
| Surrounding temperature value[°C] | -40...80 |
| Temperature for storage[°C] | -40...100 |
| Safety feature | IP 65; IP 67 |
Download Specification for SA5020
Download PDFRELATED PRODUCTS
