Flow Sensor Ifm SM8050
IFM CATEGORIES
Flow Sensor SM8050
Brand: Ifm
Product Code: SMR11GGX10KG/US
- Accurate measurement of flow and medium temperature value
- Excellent precision, reproducibility, and measurement responsiveness
- Including an analog output and an IO-Link interface
Contact via Zalo
Phone call
Product characteristics
| Total count of inputs and outputs | Count of analog outputs: 1 | ||
| Measuring span[l/min] | 0.2...100 | ||
| Connection for process | screw connection G 1 with outdoor thread DN25 flat seal | ||
| System | gold-plated terminals | ||
| Application | for commercial applications | ||
| Setup | connection to pipe via an adapter | ||
| Media | Conductive fluids; water; aqueous media | ||
| Comment on medium |
| ||
| Intermediate temperature value[°C] | -10...70 | ||
| Pressure classification |
| ||
| MAWP (for uses in compliance with CRN)[bar] | 11.2 | ||
| Response duration[s] | 0.15; (dAP = 0, T19) | ||
| Weight[g] | 575 | ||
| Housing | cylindrical | ||
| measurements[mm] | Ø 54 / L = 110 | ||
| Substance | stainless steel (1.4404 / 316L); PBT-GF20; FKM; TPE | ||
| Substances (contacted components) | stainless steel (1.4404 / 316L); PEEK; FKM | ||
| Connection for process | screw connection G 1 with outdoor thread DN25 flat seal |
Interfaces
| communication interface | IO-Link | ||||
| Mode of transmission | COM2 (38,4 kBaud) | ||||
| IO-Link version | 1.1 | ||||
| SDCI specification | IEC 61131-9 | ||||
| Configurations | Intelligent Sensor: Data Process Variable; Device Identification; Device Diagnosis | ||||
| SIO mode | yes | ||||
| Necessary master port category | A | ||||
| Analog data process | 2 | ||||
| Minimum process cycle duration[ms] | 3 | ||||
| Supported DeviceIDs |
| ||||
| Surrounding temperature value[°C] | -10...60 | ||||
| Temperature for storage[°C] | -25...80 | ||||
| Safety feature | IP 67 | ||||
| Measuring span[l/min] | 0.2...100 |
Inputs / outputs
| Total count of inputs and outputs | Count of analog outputs: 1 |
| Voltage for operation[V] | 18...30 DC; (to SELV/PELV) |
| Current draw[mA] | 95; (24 V) |
| Safety feature rating | III |
| Reverse polarity safeguard | yes |
| Activation delay time[s] | 5 |
| Measuring method | magnetic-induction |
| Overall count of outputs | 1 |
| Output response | analog signal; IO-Link; (customizable) |
| Continuous current rating of the switching output DC[mA] | 250 |
| Total analog outputs | 1 |
| Analog current output[mA] | 4...20 |
| Max. capacity[O] | 500 |
| Overcurrent protection | yes |
| Precision (within the measurement range) | ± (0,8 % MW + 0,5 % MEW) |
| Reproducibility | ± 0,2% MEW |
Download Specification for SM8050
Download PDFRELATED PRODUCTS
