Photoelectric Sensor Pepperl+Fuchs MLV41-LL-IR-IO/95/136

Pepperl+Fuchs Categories

Photoelectric Sensor MLV41-LL-IR-IO/95/136

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of MLV41-LL-IR-IO/95/136

Classifications

Item Specification
Durable fiber optic sensor designed for glass fiber applications, featuring an IO-Link interface, infrared light, push-pull output, and an M8 coupling

Overall specifications
detection range		on black (6 %): maximum distance of 55 mm on Kodak white, reflectance factor 90% up to 160 mm with LLR 04-1.6-0.5-WC3 fiber optic cable
modification range		0 ... 160 mm on Kodak white, reflectance factor 90%
Reference point		100 mm x 100 mm on Kodak white, reflectance factor 90%
illumination source		IRED
Illumination type		modulated infrared light at 880 nm
Parameters related to functional safety
MTTF_d		770 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green, continuously illuminated Power on, Undervoltage indicator: Green LED, flashing (approximately 0.8 Hz), short-circuit: LED green flashing (approx. 4 Hz) , IO-Link communication: green LED turns off momentarily (1 Hz)
operation indicator		Yellow indicator LED, illuminates when the receiver is active; blinks when the functioning reserve is insufficient
control components		Sensitivity calibration
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		max. 10 %
No-load input current		max. 40 mA
Connection point
Type of interface		IO-Link
Protocol		IO-Link V1.0
Mode		COM2 (38.4 kBit/s)
Output
Type of switch		light/dark on
Output signal		2 push-pull (4 in 1) outputs, supplementary, short-circuit resistant, protected against reverse polarity
Switching voltage level		max. 30 V DC
Switching capacity		max. 100 mA
voltage loss		= 2.5 V DC
commutation frequency		1000 Hz
reaction time		0.5 ms
Compliance
Product specification		EN 60947-5-2
Certifications and approvals
UL certification		cULus Certified 57M3 (Only in conjunction with UL Class 2 power supply; Type 1 enclosure)
CCC certification		CCC certification / marking not necessary for products rated ≤36 V
Environmental conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Ambient storage temperature		-40 ... 75 °C (-40 ... 167 °F)
Mechanical characteristics
Fiber optic connector		04
Protection等级		IP67
Linkage		M8 x 1 socket, 4-pin
Material
	Housing	Aluminum , Delta-Seal coated
	optical surface	Fiber optic link
	Connector device	metal
Mass		50 g
Measurements
	Height	56.5 mm
	Width	31 mm
	Depth	13.6 mm