Photoelectric Sensor Pepperl+Fuchs RL28-8-H-1500-LAS/47/115b

Pepperl+Fuchs Categories

Photoelectric Sensor RL28-8-H-1500-LAS/47/115b

Brand: Pepperl+Fuchs
Product Code:

Contact via Zalo

Phone call

Share on:

Description Download Accessories

Datasheet excerpt: Technical data of RL28-8-H-1500-LAS/47/115b

Classifications

Item Specification
Background elimination sensor

Overall specifications
Detection distance		100 ... 1500 mm
Minimum detection range		50 ... 200 mm
Maximum detection range		100 ... 1500 mm
Background elimination		max. + 10 % above the upper limit of the detection range
illumination source		laser diode
Illumination type		modulated red light in the visible spectrum
Laser specified ratings
	Note	LASER LIGHT , DO NOT STARE INTO BEAM
	Laser category	1
	Wavelength	650 nm
	Beam spreading	< 1.5 mrad
	pulse duration	4.5 µs
	Repetition frequency	approx. 1.5 kHz
	maximum pulse energy	17 nJ
Illumination point depiction		max. 1.5 mm x 4 mm, light beam perpendicular to housing
Black-white contrast (6 %/90 %)		= 40 %
Ambient light threshold		50000 Lux
Parameters related to functional safety
MTTF_d		590 a
task duration (T_M)		20 a
Diagnostic Range (DC)		0 %
Indicators/operation controls
Operational status indicator		LED green
operation indicator		2 LEDs yellow ON: object detected within the scanning area OFF: item beyond the detection range
control components		detection range adjuster , Light-on/dark-on toggle switch
Electrical parameters
Operational voltage		10 ... 30 V DC
Ripple		10 %
No-load input current		= 40 mA
Ingress protection rating		II, rated insulation voltage = 250 V AC with pollution degree 1-2 according to IEC 60664-1
Delay time prior to availability		= 2 s
Output
Type of switch		switchable light/dark on
Output signal		2 PNP outputs, supplementary, short-circuit protected, reverse polarity safeguarded, open collector
Switching voltage level		max. 30 V DC
Switching capacity		max. 200 mA
commutation frequency		140 Hz
reaction time		3.5 ms
Compliance
Product specification		EN 60947-5-2
Laser safety		EN 60825-1
Certifications and approvals
Ingress protection rating		II, rated voltage = 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL certification		E87056, cULus Certified, Class 2 power supply, type rating 1
FDA certification		IEC 60825-1:2007 conforms with 21 CFR 1040.10 and 1040.11, excluding deviations as stated in Laser Notice No. 50, dated June 24, 2007
Environmental conditions
Ambient temperature		-10 ... 50 °C (14 ... 122 °F)
Ambient storage temperature		-40 ... 60 °C (-40 ... 140 °F)
Mechanical characteristics
Protection等级		IP67
Linkage		0.2 m rigid cable featuring a 4-pin M12 connector
Material
	Housing	Plastic ABS
	optical surface	synthetic panel
Mass		approx. 70 g
Measurements
	Height	88 mm
	Width	25.8 mm
	Depth	54.3 mm